DIY Hot Rodder and Car Enthusiast Blog

This vehicle wheel bolt pattern drill guide helps you drill out both your axle and brake drum or brake rotor to a different bolt pattern. [More…]

Rick, a fabricator at South Side Sleds Custom Cycles & Hot Rods recollects building his 1931 Ford Model A Gasser over the course of 8 years. [More…]

Melding design elements from different Chevy models, the 789 shows the world that you really can’t have enough of a good thing. [More…]

Replacing a head gasket can be difficult and time-consuming, or expensive should you choose to use a mechanic. Here are 4 DIY alternatives. [More…]

Casey’s Customs is chassis swapping a 1951 Chevrolet with an AWD, 6-cylinder 1999 GMC Jimmy donor and has set a budget cap of $3,500. [More…]

Plunge and Gouge metal cutting methods are tested with high-speed camera footage to figure out why cut off discs deteriorate so quickly. [More…]

Dan at DD Speed Shop’s trials and tribulations of rescuing and resurrecting a ’55 Chevy Nomad wagon, one of the worst cars he’s ever bought. [More…]

Hotrods race the 1/8th mile in the sand. Walk-though the Tech Parking Lot, rolling out to the beach, and take a drag down the strip. [More…]

See the tools and techniques Mike Bello at Bello’s Kustoms uses to create a nice flowing roof out of a 3-inch chop on a 1937 Ford. [More…]

Project Farm tests Tape Measures including Milwaukee, DeWalt, Stanley, Craftsman, Klein, Kobalt, Lufkin, Bauer, Komelon, Kutir, Ming Hao. [More…]