How To & DIY
How To Remove Rubber Bushings without a Press or Torch
This tech short shows how to remove old rubber suspension bushings without a press or without burning them out using flames. [More…]
Steering & Suspension
DIY Projects
Leaf Spring Axle Flip ~ How To Install a C-Notch and Axle Flip Kit
Follow along as we lower the rear of our ’75 GMC Sierra Classic using an Axle Flip Kit on the leaf springs and install a C-Notch kit. [More…]
How To & DIY
How To Reverse a Main Leaf Spring or Eyelet Flip
MacroMachines demonstrates how to reverse the main leaf of a rear spring from a Model T, difficult due to the large hump in the middle. [More…]
Ideas
4 Rat Rod Air Ride Suspension Designs That Lay Body and Ride Smooth
Village Customs Rat Rod Shop shows you four distinct types of rat rod air suspension setups that will lay body and ride smoothly. [More…]
DIY Projects
How To Build a Custom Steering Column Drop
Matt makes a custom steering column brace/drop for a cowl steering setup. [More…]
Technical Info
How To Determine Steering Spline Size
Use this steering box/steering rack size chart to select the proper rack and pinion or steering box spline size for your system. [More…]
How To & DIY
How To Measure for a Straight Axle Spring
There are two measurements that you can use to determine what straight axle spring length you’ll need for your project. [More…]
How To & DIY
How To Install Rear 4-Link Suspension for Air Ride and Coil-overs
How to weld-in a 4-link rear suspension system onto any chassis: axle location, Panhard bar fitment, theory and shock absorber angle. [More…]
Builds and Examples
1936 Ford Humpback Rat Rod Roadster Build
We started with a chassis, straight axle, wishbone, spring, and a 1936 Ford Four Door Humpback body that was cut down to a two-door roadster. [More…]
How To & DIY
How To Replace Ball Joints
With a good set of instructions, a small amount of mechanical knowledge, and a bit of patience, you can change the ball joint yourself. [More…]
