Bad Chad Hiltz explains and demonstrates the basics of bodywork, primer, pinholes, guide-coats, and sanding…
Bodywork, Primer, Pinholes, Guide-Coats, and Sanding with Bad Chad
How To & DIY
How To Fix Car Dents with Fire
Here’s a tech tip on using an oxy/acetylene torch to help pull dents from automotive panels, demonstrated on a 1967 Chevrolet Camaro. [More…]
How To & DIY
How To Shrink Stretched Sheet Metal with a Propane Torch
The condition known as an “oil can” is common in automotive bodywork — the panel position is bi-stable and can flop in or out. [More…]
How To & DIY
How To Align Body Panels
Mark Ehlen, Car Craft — A paint job can be no better than the prep underneath it. Any flaw in the bodywork will only be magnified by the topcoat, so great pains should be taken to [More…]
