Randy goes over everything that a beginner needs to know when they start powder coating.
Everything is covered, from safety supplies to getting the right powder coating system; Eastwood makes getting started easy…
This kit comes with the items you need to start powder coating. Just add compressed air and a curing oven or lamp.
Eastwood Dual-Voltage HotCoat Powder-Coating Gun
Dual-Voltage HotCoat Powder-Coating Gun gives you complete coverage from tight areas to large surfaces.
- Extremely durable finish
- Coat and cure in under an hour!
- Easy to apply
- Quick color changes
- Economical
- Versatility with 2 settings
- Low 15,000-volt setting
- High 25,000-volt setting for multi-coat coverage over larger areas
- Increased powder adhesion
- Minimal overspray
This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. The new Dual Voltage system gives you the capability to coat small areas using the Low 15kv setting. Or coat large areas using the High voltage setting 25kv.
All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) and an electric oven or toaster oven.
The Dual Voltage HotCoat gun is one of the best powder coating guns on the market today. Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available.
You’ll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available.
Thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.
One 8-oz. bottle of powder covers the same area as 2-3 cans of spray paint, and clean-up is easy since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents.
HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).
Eastwood Powder Coating Accessory Kit
The accessories kit comes with the items you need to start powder coating except for a compressor and curing oven or lamp. The high-temperature tape and silicone plugs make it easy to mask areas you do not want to get powder on.
The safety wire is great for hanging parts on your powder coating rack or oven. This kit also comes with an in-line air filter to keep contaminants out of your gun and powder. Also included is an 8 oz. bottle of high gloss.
