Tools That Don’t Suck ~ Extended Reach Air Cut Off Tool

Eastwood's Pneumatic Reversible Cut-Off Tool
Eastwood's Pneumatic Reversible Cut-Off Tool

If you have been following the IronTrap Garage 1939 Forgotten Hot Rod project you have seen this bad boy in use — the Extended Reach Air Cut Off Tool is full of features that make it a true go-to tool when you need a cut off wheel in a tight spot.

It has speed control, which is helpful when grinding, and is reversible which allows you to direct the trail of sparks away from stuff in your garage you’d rather not shower with sparks…

Eastwood 4″ Extended Reach Air Cut Off Tool w/ Forward and Reverse

Eastwood’s Pneumatic Reversible Cut-Off Tool is designed and built to get into tight areas.

  • Forward and reverse cutting direction
  • Works with your 4″ cut-off wheels (sold separately)
  • 14,000 RPM
  • 1/4″ air inlet
  • Requires 7.1 cfm of air at 90psi
Eastwood 4" Extended Reach Air Cut Off Tool w/ Forward and Reverse
Eastwood 4″ Extended Reach Air Cut Off Tool w/ Forward and Reverse

The tool’s unique, low-profile cutting-head cut off tool design lets you work the tool into tight areas to cut bolts, brackets, sheet metal, rod and for general metal fabrication.

Purchase the Extended Reach Air Cut Off Tool directly from Eastwood.

Extended Reach Air Cut Off Tool uses 4″ cut off wheels. The tool utilizes either 4” x 3/8” Arbor or 4” x 5/8” Arbor wheels, minimum 15,000 RPM.

A Must-Have In Any Shop

This pneumatic cut off tool is a must in any shop doing restoration projects or other metal fabrication.

You’ll use it for cutting patch panels, fabricating steel plate, removing damaged frame sections or simply cutting rusted bolts free. A finger-controlled knob offers “on the fly” speed adjustment that reduces cutting-wheel hop and prolongs cutting life by adjusting the speed to the type and thickness of the material being cut.

Eastwood 4" Extended Reach Air Cut Off Tool w/ Forward and Reverse
Eastwood 4″ Extended Reach Air Cut Off Tool w/ Forward and Reverse

Reversible Cutting Direction

One of the most important features is the reversible cutting direction. If you’ve ever used a grinder or cut-off tool where you could not control in which direction the sparks fly, you’ll appreciate the ability here to reverse the cutting direction to send sparks away from you.

No longer will you have to reposition your body and head at awkward angles to avoid spark contact—simply flip the switch and the sparks fly 180 degrees away from you, others or flammable objects.

Eastwood 4" Extended Reach Air Cut Off Tool w/ Forward and Reverse
Eastwood 4″ Extended Reach Air Cut Off Tool w/ Forward and Reverse

The safety guard can rotate 45 degrees in either direction. The tool is 15″ long overall and weighs about 1.5 lbs. Utilizes 4” x 3/8” Arbor or 4” x 5/8” Arbor, minimum 15,000 RPM.