Setup a DIY Paint Booth in your Home Garage ~ FAST!

Busted Classic Garage decided to build a temporary paint booth inside his garage to paint parts for a couple of projects, and as sometimes happens, things got way out of hand.

He ends up building a pulley system to move the wall in a couple of seconds — the setup time for this paint booth is very impressive and makes this is a must-have in every garage if you plan on painting classic cars, parts, and projects…

DIY Paint Booth Parts List

• 3 mil 10×25″ Polar Plastics clear plastic sheeting (I used 4 of these)
• 1″ PVC and elbows (for the lower frame)
• 1×2″ wood pieces (for the upper frame)
• A handful of Screw Eyes
• A handful of Open S Hooks
• 2 Hitching Rings with a square plate (the hoop)
• 3/16″ 100′ Polypropylene diamond braided rope (depends on how many walls you need)
• 3/4″ Koch single sheave pulley (depends on how many walls you need)
• 1″ 4×8′ Polystyrene foam board cut to fit your doorway
• 20x20x1″ True Blue Fiberglass House filter (for the fans)
• 20x24x1″ True Blue Pleated Media Furnace Filter (for the foam door)