How An Amateur Built This 1000hp Custom 1970 Trans Am
This is one of the wildest Trans Am builds ever. It has a full tube chassis, a Chevy LSX that revs up to 10,000 RPM, and makes over 1,000 horsepower.
You may have seen this Pontiac a few years ago when it debuted at The SEMA Show, but Riley Stair, the mastermind behind this car, is still tinkering with it to this day.
From The crazy engine to the THICC wheels, we’ll show you why this Trans Am one of the most cohesive and well-put-together builds we’ve seen!
Chassis / Suspension
Entirely TIG-welded, noded, space frame chassis. Steel body
Hand build IRS and IFS, built to exhibit correct suspension geometry at the desired ride height of 2”
Hand built control arms front and rear
Zinc plated suspension arms, bellcranks, rear differential cradle, sway bar arms, and motor mounts, custom rear knuckles to house 5 on 5 drive hubs.
Coleman 2” snout modular spindles and PCR 5 on 5 race hubs up front.
Speedway engineering adjustable splined sway bars front and rear
Custom inboard pushrod front and rear suspension, utilizing custom Performance Shock Inc Built —-Ohlins TTX36 double adjustable coilovers with Eibach ERS springs
Steering
Custom Woodward steering quick ratio power steering rack and remote steering reservoir and safety column/QR
PSC power steering pump w/ remote res
Momo Prototipo steering wheel
Engine / Drivetrain
Motor Machine in Carmichael CA built 400ci LSX Dart LSNext2 Block, Dart 368cc 10* canted valve heads, loaded with victory titanium valves, PAC springs, w/ ti retainers, .970 solid roller lifters, custom tapered 7/16 pushrods, custom ground Cammotion billet camshaft, Jesel shaft rockers, Jesel belt drive, Billet no drill balance Callies crankshaft, GRP aluminum rods, One-off 16.25:1 Compression JE pistons, Arp fasteners throughout
FAST 4500series thin throttle body mounted atop Dart intake, made specifically for their canted valve heads (necessitated by their reversed intake and exhaust ports, negating any other intake fitment)
5 Stage ARE dry sump pump, 4 gallon Peterson oil tank, ARE remote oil filter housing, Vibrant performance vent can.
All fluids throughout the entire car exclusively plumbed with Vibrant performance -AN lines and fittings.
Custom G Force CV axles
RTS built Winters Quick change differential (currently 4.12 ratio)
Custom Fuel Safe fuel cell, featuring bonded collector at pickup in Alcohol safe FIA SFI approved bladder.
Dual Aeromotive Eliminator fuel pumps, feeding straight Methanol through Aeromotive fuel filter, to Holley EFI fuel rails, into Holley 225lb alcohol safe injectors.
Exhausted via a pair of 4-to-1 headers, built to true equal-length with equidistant steps, built to engine specifications. Transition to dual 4″ ovals and into the 2×14” side exit exhaust protruding through the passenger door. The entire system is fabricated exclusively out of Vibrant Performance ready to weld stainless steel “U” and “J” bends.
TEX T101a 4 speed dog box from NASCAR cup car, with DEI shifter assembly.
1350 spicer U jointed custom driveshaft with Sonnax Chromoly slip
5.5” sintered metallic, triple-disc quartermaster clutch and starter ring assembly, with quartermaster aluminum bell housing and reversed mount starter.
Body
Media blasted, stripped to single-layer shell
All rust repaired with replacement panels and TIG welded in.
Body affixed to finished chassis, at which point the entire car was powder coated light gray by Performance Powder Coating and Stripping in Orangevale CA.
New bumper, tail lights, marker lights, new chassis/body wiring harness, new tail light filler panel, new lettering, new sill plates, new door handles, new locks, new strikes, new functioning latch assemblies, new weather stripping, new windlace, new grilles, new vents, etc.
Front T/A fender vents moved back 4.75”
“Shaker” hood scoop moved back to the rear of the hood to match engine set back
All metal fender flares
Aluminum air dam
Side exit exhaust out the passenger door
Capped door tops where window tracks used to exist (gutted doors with dimple died frames = no windows anyways)
Bead rolled aluminum firewall panels
Painted Ermine white
Lexan front and rear windows, with aluminum stiffening ribs
Brakes
Tilton 5/8 and 3/4 master cylinders
2 piece slotted vented rotors, AP 6 piston front, and 4 piston rear calipers, hand made aluminum shrouded brake ducts.
Front brakes ducted from the front valance, connected to front brake duct shrouds via Vibrant Performance HD Clamps for easy removal
Rear brakes ducted through NACA ducts in the rear window
Cooling
Allstar large oil cooler for engine oil
Allstar rear oil coolers (1 for differential fluid, fed by Tilton pump, one for transmission, fed by second Tilton pump) mounted horizontally and fed via NACA ducts in the rear window, affixed to custom cooler hats via 3” Vibrant Performance HD clamps for easy removal for servicing, etc.
Water is cooled via dual “V mounted” Chase Bays tucked civic radiators. Due to the height restrictions of the nose of the car, that was the only way to get enough core into the car to cool the power plant efficiently.
Rads are fed with Meziere remote electric water pump
Interior
Kirkey Full containment Driver seat and one-off Kirkey full containment Passenger seat
Bead rolled aluminum interior panels, DZUS fastened for removal to access drivetrain and wiring/plumbing, etc.
Hurst 10” shift selector rod
Rennstall shift knob
MOMO Prototipo steering wheel
Woodward steering column
Woodward steering QR
Holley digital dash
ARC switch panels
Holley Dominator ECU mounted atop the dash
All wiring disconnectable and removable via bulkhead connectors for servicing and maintenance of under panel goods.
Holley Smart Ignition coils mounted on passenger side kick panel area to escape engine bay heat
Simpson 7 point harnesses
Bead rolled Aluminum door cards with Simpson door pull straps to engage factory door handles and open door from inside
Anti Gravity Lithium 5lb battery behind the driver’s seat
Two 5lb safecraft halon fire suppression bottles plumbed from behind passenger seat
Tilton brake bias knob, master shut off button and fire pulls next to switch panel
Lexan bulkhead in the main hoop to separate the driver compartment from the exposed rear section of the car. -Bulkhead fittings allow fluids and electrical to pass through lower, centermost Lexan bulkhead panel
Tilton floor mount pedal assembly
Howe racing brake and clutch fluid reservoirs
Wheels / Tires
Panasport C8 16×12 front and rear wrapped in Hoosier slicks, measuring 23.5x12r16 in the front and 25.5×12.5r16 in out back.
The Greatest Trans Am Ever Built ~ Hoonigan Build Biology