In this detailed tutorial, you’ll learn how to make polyurethane engine and transmission mounts from liquid polyurethane yourself, at home.
The advantages of doing this as opposed to buying readymade aftermarket polyurethane engine mounts are that this method is much cheaper ($25 USD for 4 mounts vs. $160 USD for 2 mounts in the case of the demo car in the video).
The advantages of polyurethane engine mounts (especially torque mounts) are improved responsiveness, reduced wheel hop, preventing horsepower loss due to engine movement, and no need to replace the mounts ever again.
The video shows a detailed procedure, from removing the old mount inserts, burning out the rubber, and pouring in new liquid polyurethane. The product I used is ReoFlex™ 60 from Smooth-On, Inc. There are many others out there, however, this is just what was available to me and in the right shore hardness.
The additional benefit of DIY mounts is the fact that you can customize the shore hardness of the mounts to make it best suited to your application. I have selected 60A shore hardness which is a nice compromise between the 80A shore hardness stuff which is more suited to track day cars and the 40A shore hardness stock rubber.
The important thing is to ensure the pins inside the mounts are fitted in the same position as stock and they must be positioned to stand flat for the liquid polyurethane to cure properly.
Think in advance about where the polyurethane will be drying as this is where the engine mounts will be sitting for anywhere between 16-48 hours depending on the temperature and liquid polyurethane product/brand.
The video above raised two very important questions:
In this video both of those questions are answered.
Polyurethane engine mounts are great for cars that see a lot of track days, but for something that you are going to daily drive I honestly think that they are a bit too annoying. If your car will spend most of its life on public roads, I would advise against polyurethane engine mounts, since you will be experiencing their negatives most of the time and harnessing their benefits rarely.
On the other hand, if you have a weekend warrior or a track toy then polyurethane engine mounts are a great idea because the noise and the vibration will be an unimportant side-effect and you will harness the benefits of a more agile car and a more responsive driving feeling.
Pole Barn Garage bought back the 1959 Dodge D-300 truck that I learned to drive… Read More
Merricks Garage offers a comprehensive guide to efficient and effective electrical wire labeling techniques. [More...] Read More
This is a game-changing product from Speedway Motors: the bolt-in OBS Chevy 9-inch housing designed… Read More
Watch a checkered flag shift knob is made! There's no CNC machine or 3D Printer… Read More
Tackle the task of polishing and removing scratches from clear plastics quickly and easily. [More...] Read More
Witness the captivating journey of Model A Ford production from raw materials to finished cars… Read More