Bolt Pattern Cross Reference and Wheel Sizes

CAN-AM BOMBARDIER QUEST 650/XT Bolt Pattern and Wheel Sizes

4 X 110 Bolt Pattern Measurement and Specifications

The 4 X 110 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (4) and the bolt circle measurement (110), the notional circle determined by the center position of the studs.

How To Measure 4 Lug Bolt Patterns

Bolt Pattern GaugeMeasure 4 lug wheel bolt patterns from center to center distance between two studs that are across the hub from each other. This measurement is your bolt pattern diameter. Learn more about wheel dimensions below.

What Vehicles Use Wheels With 4 X 110 Bolt Pattern?

The 4 X 110 bolt pattern is common to ARCTIC CAT, CAN-AM BOMBARDIER, HONDA SPORT, KAWASAKI, MAZDA, POLARIS, SUZUKI, YAMAHA, vehicles. A full list of specific vehicle makes and models appears below.

Bolt Pattern Torque Sequence / Specifications:

4 X 110 Bolt Pattern Torque Sequence Specifications: 1, 3, 2, 4

Note: Alloy wheels should always be installed using a torque wrench ensuring proper mount. Check your vehicle owner manual for proper specifications. How To Properly Torque Lug Nuts / Lug Bolts

Stud SizeTypical Torque Range in Ft/LbsMinimum Thread Engagement (turns)
12 x 1.5 mm70 - 806.5
12 x 1.25 mm70 - 808
14 x 1.5 mm85 - 907.5
14 x 1.25 mm85 - 909
7/16 in.70 - 808
1/2 in.75 - 858
9/16 in.135 - 1458

Wheel Bolt Torque and Stretch

It is prudent to re-torque wheels after about 60 to 90 miles (100km to 150km) of driving. Learn more about lug nuts and torque.

Hub Center Bore

Hub Centerbore MeasurementsHub Center Bore: Relates to the center hole in the wheel that centers the wheel on the hub of the car. Since most wheels are mass produced, they have a large center bore to accommodate several different vehicles. If this is the case, it is recommended that you use a hub ring. Hub rings are hard plastic or metal ring that fits between the wheel and the vehicle. This centers the wheel perfectly on the hub ensuring that there is no run out when the wheel is installed on to the vehicle. Without hub rings it is possible to get vibrations even if the wheel / tire assembly is perfectly balanced.

Wheel Offset

Wheel offset is the distance from the mounting surface of the wheel to the true center line of the rim. A positive offset means the mounting surface of the wheel is positioned in front of the true center line of the rim / tire assembly. This in effect brings the tire in to the fender well more. Conversely, a negative offset means the mounting surface of the wheel is behind the true center line of the rim / tire assembly. This will cause the tire to stick out away from the vehicle.

Wheel Offset

H = High - Positive Offset, typically FWD (Front Wheel Drive) +45, 40, 35 offsets

M = Medium - Neutral Offset, typically RWD (Rear Wheel Drive) +20 offset

L = Low - Zero to Negative Offset, Offset typically RWD (Rear Wheel Drive) 0 offset

Wheel Offset Chart

Vehicle Make(s) with 4 X 110 Bolt Pattern: