Categories and Tags

Popular Posts

• Classic Project Cars, Trucks, and Part Donors For Sale in Great Bend, KS
  (169,228)
  Nobody Else's Auto LLC in Great Bend, Kansas has 100s of project, build, and part donor quality cars and trucks for sale.
• Chevrolet and GMC Project Trucks For Sale in Great Bend, Kansas
  (77,476)
  Nobody Else's Auto LLC has Chevrolet and GMC projects, build and part donor quality trucks for sale in Great Bend, Kansas.
• 4 Budget Dynamat Alternatives for DIY Vehicle Sound Deadening
  (63,997)
  Nothing ruins a sweet ride more than vibrations and doors that rattle. Here's how to sound deaden and insulate your ride on a budget.
• Small Block Chevy Twin Turbo Kit for Under $1500
  (56,534)
  For the price, this is the most complete Small Block Chevy Twin Turbo Kit available and has all brand-new, quality parts.
• Chevy, GMC, Dodge, Ford, and IH Project Trucks For Sale in Pella, Iowa
  (50,554)
  Doug has managed to keep hundreds of old cars and trucks that are restorable or have very hard to find parts left on them.
• 1949-54 GM Torque Tube to Open Driveshaft Conversion Donor Vehicles
  (47,036)
  The primary complaint about an enclosed torque tube driveline is that there are very limited ratios available for the rear end.
• How To Convert a Car Alternator into a Go Kart Motor
  (46,066)
  An automotive alternator can be converted into a powerful hybrid brushless motor in a couple of hours with some know-how and common tools.
• How To Build A Hot Rod
  (44,967)
  Learn how to build a hot rod with these resources that help facilitate your build from inspiration and planning to build and customization.
• OEM and Aftermarket Shift Knob/Shift Handle Thread Size Chart
  (44,142)
  Shift Knob and Handle Thread Sizes may vary on vehicle make, model, and trim level, and whether it is OEM, performance, or aftermarket...
• How To Install Suicide Door Hinges
  (42,348)
  If you're handy with a cutting wheel and welder, tackle the job yourself with a suicide door hinge and bear claw latch kit.
• Classic BIG Trucks For Sale in Harvard, Nebraska
  (41,448)
  Parts trucks and full runners perfect for someone doing a "big Truck" build, above-average cabs perfect for "big short truck" projects.
• The Holey Goat ~ Wrecked 1970 Pontiac GTO Goes From Dead to Driving
  (41,042)
  This bullet hole-riddled 1970 Pontiac GTO was part of a 260+ vehicle auction in 2021 ~ Pole Barn Garage has vowed to get it driving again.
• Incomplete Projects ~ When You Can Only Afford Half a Hot Rod
  (37,088)
  When your custom car or truck project budget lets you only afford half of a car or truck, don't despair — get creative!
• Original Exterior Sun Visors For Sale ~ Chevy, Ford, Mercury, Mopar, More
  (34,284)
  Adding sun visors to your vehicle can help you see while driving in bright sunshine or to add that full custom classic or vintage car look.
• How To Determine Engine/Pinion Angle
  (33,584)
  Engine and pinion angle are relative to the ground. Most engines are set at 3 degrees, this allows the carburetor to sit level, however...
• Classic Truck Beds For Sale in Harvard, Nebraska
  (32,871)
  Current Inventory includes full beds, parts, and trailer conversions perfect for someone doing a restoration or rat rod project.
• Classic Studebaker Cars, Trucks and Parts For Sale in Harvard, Nebraska
  (32,184)
  Current Inventory includes Studebaker parts, parts cars and full runners perfect for a classic car restoration, above-average car bodies.
• International Trucks For Sale ~ Nobody Else's Auto in Great Bend, Kansas
  (31,287)
  Nobody Else's Auto has approximately 40 International trucks in stock for projects and parts. Current inventory is mid-1930s to mid-1950s.
• Skull Headlight Covers for 7" Headlights
  (28,824)
  Skull Headlight Covers are a great accessory and fit 7-inch headlights popular from the late 30s through the 70s.
• How To Build Your Project Car Engine On A Budget
  (27,519)
  It’s done. You’ve pulled the trigger on that project car or truck and dragged it home. Here's what you can get done with a budget from $50 to $2,500.
• How To Paint a Bare Metal Effect on Any Surface
  (26,951)
  A concise and easy-to-follow DIY that shows you how to can make any surface; Wood, Plastic, Fiberglass, etc. look like bare metal.
• How To Get Neat MIG Welds In 3 Easy Steps
  (26,875)
  Here are 3 quick steps to get neat and consistent MIG welds for your projects.
• The Original 1966 Pontiac GTO Monkeemobile
  (26,101)
  The Monkeemobile is a Pontiac GTO modified by Dean Jeffries. Mel Gutherie tells what it's like to own and drive this piece of pop culture...
• How To Identify a 4L60E Transmission and Decipher Case Tags
  (24,505)
  Various case changes and other differences in the 4l60E Transmission variations since 1993 are discussed with a full list of Tag ID meanings.
• How To Determine The Age Of Your Tires
  (24,415)
  It is easy to identify when a tire was manufactured by reading its Tire Identification Number (or serial number) and decoding it.
• Engine Turning 101
  (23,127)
  Engine turning, also known as damascening, jeweling, krayling, or swirling, is a quintessential example of high-quality auto metalworking.
• I Bought Every ICON Tool Harbor Freight Had
  (22,165)
  Every Harbor Freight ICON tool they had on the shelf was purchased and then compared to Husky, Craftsman, and Snap-On Tools.
• The Holey Goat '70 GTO Crashes Kansas City Autorama World of Wheels
  (22,147)
  Pole Barn Garage made Autorama World of Wheels, Kansas City 2022! The shop is saved. Check out awesome reactions, Dalton's serious competition for a trophy, plus lots of other great cars and trucks! Also, stay tuned to the end to see the Holey Goat...
• Brush or Spray-On Chrome Alternative ~ Easy Chrome
  (21,273)
  Easy Chrome is an easy to apply chrome paint that provides a water-proof chrome finish that looks like real chrome.
• 11 Essential Road Trip Routes ~ Road Trip USA
  (19,522)
  Tired of your typical cross-country road trip and the boredom of endless interstates? Take the next exit and get on a two-lane highway.
• This HEMI-Powered VW Beetle is a Real Life Hot Wheels
  (18,610)
  This classic VW Beetle has been chopped, sectioned, and slammed on a full-tube chassis and is powered by a late-model 5.7L HEMI.
• How To Protect and Preserve Patina or Rust Without Clear Coat
  (17,747)
  How to protect rust or patina with a formula of linseed oil and boiled mineral spirits that you can mix and apply quickly and easily.
• 1947-54 Chevrolet 3100 Widebody Stretch / Chevy SSR Chassis Swap
  (17,015)
  1947-54 Chevy / GMC Advance Design 3100 truck body is cut down the middle and widened 5 full inches to facilitate a Chevy SSR chassis swap.
• Building a Budget Hot Rod Chassis
  (16,394)
  DD Speed Shops "T Wrecks" build is turning out to be a visual guide for the ins-and-outs of building a hot rod from what's on hand.
• How To Diagnose Common Engine Problems with a Vacuum Gauge
  (15,297)
  One of the easiest, cheapest, and fastest ways to check an engine for serious issues is to perform a vacuum gauge test.
• Testing the Cheapest 110v MIG Welder on Amazon
  (15,144)
  Wranglerstar tests the cheapest MIG welder on Amazon. This benchtop wire-feed welder includes everything needed to fabricate small projects.
• Electric to Mechanical Speedometer Cable Drive Conversion
  (14,956)
  Have you put a modern transmission into your classic car, but want to keep your factory mechanical speedometer working? A Cable Drive Conversion is your solution.
• 38+ Garage Design and Storage Ideas
  (14,893)
  38+ Home Garage Design, Small Space Storage and Organization Ideas...
• How To Re-Drill Axles/Brakes For Different Bolt Pattern Wheels
  (14,621)
  This vehicle wheel bolt pattern drill guide helps you drill out both your axle and brake drum or brake rotor to a different bolt pattern.
• Martell's Salvage has 1,000s of Project Cars and Trucks For Sale in ND
  (14,461)
  Martell's Salvage has more than 4,000 vehicles on hand, the bulk of which are fully restorable project vehicles. Take a tour.
• 1933 Plymouth Hot Rod ~ Burnouts and Shredding Tires
  (14,404)
  This incredible build is TJ Russell's amazing '33 Plymouth, hand-built from the ground up ~ Photo gallery, video, and hella burnouts.
• How To Calculate the Size of Carburetor Needed in CFM
  (14,261)
  Optimize performance with a correctly sized carburetor: This calculator gives the engine's air intake volume requirements in CFM...
• Speed Drawing ~ The Artwork of Mad Mac
  (13,864)
  Italian artist Maurizio Colangiuli, aka Mad Mac, has always been fascinated by art, design, and all that is vintage.
• Will It Run and Drive? Lawn Mower Carburetor on a Ford 302 V8 Engine
  (13,761)
  45 MPG from a Ford V8? Luke adapts a lawn mower carburetor to the 302 in his Ford Maverick. Is this practical, or even possible?
• Volkswagen Split Window Snail Camper Van Build
  (13,461)
  The guys from Yumos Garage (Indonesia) transformed a Volkswagen bus into a fantastically beautiful Snail Camper-van.
• How To Make DIY Carbon Fiber Fenders and Body Panels
  (13,422)
  Throttle Stop Garage makes a set of carbon fiber fenders for his Volvo Amazon project, and he does not spare any details.
• Change TH350 & TH400 Shift Points with an Adjustable Vacuum Modulator
  (13,326)
  The B&M GM TH400 and TH350 Vacuum Modulator is fully adjustable, allowing you to customize the shift points (within a range of 2-4 mph).
• How To Turn Railroad Track into a DIY Homemade Anvil
  (13,326)
  A short stretch of railroad track is turned into an anvil. The basic shape was cut with an angle grinder and file, then sanded and blued.
• Pikes Peak Hill Climb Record Shattered by a 1949 Ford Truck
  (12,894)
  A new record was set for the fastest diesel vehicle to complete the Pikes Peak Hill Climb by a 1,400 HP Cummins powered 1949 Ford Truck.
• Tire Width Minimum, Maximum, and Ideal Size Chart by Wheel Width
  (12,774)
  How to properly measure wheel width to determine proper tire width plus minimum, maximum and ideal tire width chart.
• DIY Tire Bead Breaker from Scrap Metal and Floor Jack
  (12,548)
  Here's a tool you can make in your workshop to help break beads loose on stubborn tires — Works great for motorcycle, quad, ATV, buggy, side by side, car, and truck tires.
• Fast & Furious 4 1970 Plymouth Roadrunner ~ From Stunt Double to This
  (12,323)
  Jamie's 1970 Plymouth Roadrunner was originally a stunt double for Steve Strope's "Hammer" in Fast and Furious 3 "Tokyo Drift" and Fast 4.
• 1954 Ford F100 / 2000 Lincoln Towncar Chassis Swap for Under $1,000
  (12,099)
  Casey's Customs chassis swaps a $250 1954 Ford truck body on to a 140K Mile 2000 Lincoln Towncar chassis donor acquired for $500.
• Rebuilding Gas Monkey Garage's Wrecked 1976 Chevrolet C10
  (11,802)
  Alex Rebuilds picks up the wrecked Richard Rawlings and Aaron Kaufman built Gas Monkey Garage 7976 Chevy C10 for a full rebuild.
• A to Z Glossary of Hot Rod Terms
  (11,758)
  Don't sound like you don't know what you're talking about next time you're at a car show or cruise-in. These are the terms you need to know.
• How To Install Universal Rear Step Notch Kit from Welder Series
  (11,401)
  This Rear Step Notch Kit is easy to assemble and install. The pieces fit together using alignment tabs to make clamping and welding a breeze.
• Common V8 Firing Orders, Distributor Locations and Rotation Directions
  (11,362)
  Common Firing Orders. MSD Ignition created this helpful chart that displays many common V8 firing orders and distributor direction.
• Understanding Fusible Links ~ The One Wire That Will Save Your Car!
  (11,283)
  In an extreme current overload situation, a fusible link is melted, and ensuing spark and fire are contained within the link's insulation.
• California Man Merges Three 1950s Chevys Into One Iconic Car
  (11,270)
  Melding design elements from different Chevy models, the 789 shows the world that you really can't have enough of a good thing.
• DIY Folding Engine Run Stand Build Plans for Ford, GM, and Mopar
  (10,998)
  With some tube steel, a drill, and a welder, you can build one of these DIY engine run stands that collapse to a very storable 9" in a weekend.
• California Reporter Fired From CBS After Climbing on Classic Show Cars
  (10,772)
  A local CBS reporter in California was apparently fired after he — during a live news segment — climbed atop classic show cars!
• How To Cut Your Long Bed to a Short Bed in a Weekend
  (10,595)
  How to cut your Ford F100 long bed to short bed in a weekend DIY project ~ Two-Part video details cutting frame and bed.
• How To Adapt ANY Engine to ANY Transmission
  (10,572)
  It's simpler than you think to adapt a transmission to the engine you have — it just takes some (relatively) simple equipment and ingenuity.
• Where To Find and How To Buy Used Coyote Swap Engines or Donor Cars
  (10,558)
  Jason shares some of the things he's learned about acquiring used Coyote engines for the purpose of engine swapping.
• 1968 Porsche and VW Type 3 Fastback Mashup ~ Hotaka Saito's 913
  (10,530)
  This is Hotaka Saito's custom hand-built 913 ~ A five-year project that mashed up a '68 Porsche 912 and a Volkswagen Type 3 Fastback.
• Scallop Paint Job Ideas and Examples
  (10,473)
  Scallop Paint Jobs and Scallop Design Ideas for hot rods and custom cars and trucks.
• How To Adjust a 700R4 Transmission TV Cable
  (10,446)
  The geometry and tension are absolutely critical for the Throttle Valve (TV) Cable and transmission to be happy. Here's how to adjust it.
• Which Car Battery is Best?
  (10,440)
  Optima AGM, Duralast, Everstart, Diehard, SuperStart, and Autocraft car batteries were tested for internal resistance, cranking amps, charge rate, and cold-cranking amps.
• MaxJax 2-Post Car Lifts for Home Garage Use
  (10,354)
  For home-garage convenience, portability and compact storage, nothing beats the MaxJax car and truck lift by Dannmar.
• Vintage 4x4 Expedition 2020 ~ Classic 4wd Trucks and 100s of Trail Miles
  (10,317)
  The Vintage 4x4 Expedition is a 5-day annual event in Placerville, CA where vintage off-roaders put 100s of trail miles on pre-1975 vehicles.
• How To Make a Simple Louver Press
  (10,193)
  How to make a very simple louver press for punching louvers, and it works really well even on large panels...
• Grand National Roadster Show 2020
  (10,188)
  The show is massive with 7 buildings filled with hot rods, customs, lowriders, and this year vintage drag cars.
• Supercharged 1940 Ford Pickup Truck Build
  (10,112)
  Carolina Kustoms of Portland, Oregon transforms this old 1940 Ford Pickup into a unique show winning Muscle Truck.
• What is the Best Cutting Oil for Drilling Metal?
  (10,095)
  Project Farm tests several products to find the best cutting oil for drilling through both mild and hardened steel.
• Factory Correct Reproduction Window Stickers
  (10,041)
  Triple A Enterprises is a family-run company that was started by Bill Petriko in 1979. Bill's done extensive research (including getting dirty in old dusty attics) to ensure that all the data used comes from original documentation from dealer invoices,...
• Home-Built Custom LS3 Powered 1965 Rambler Marlin
  (9,947)
  It might be hard to believe, but Bob Bruhn's stunning '65 Rambler Marlin is very much a home-built car.
• Ford F100 / Crown Vic Front-End Swap Pros and Cons
  (9,783)
  Jeff Ford looks at the reasons to do and not to do a Crown Victoria front-end swap in a F100 truck.
• Install Bolt-On Disc Brake Conversion Kit on 8" and 9" Ford Rear-Ends
  (9,760)
  Safety matters, especially if you’re going to have passengers. Fortunately, this kit runs close to what you’d pay to replace original drums.
• How To Properly Set Up A Panhard Bar
  (9,630)
  The panhard bar is such a wonderfully simple design that gets a bad rap from a long history of poor implementation. Here's how to set one up properly.
• How To Prepare and Paint Chrome Emblems and Trim
  (9,588)
  Chrome emblems and trim look great when shiny and new, they become dull and pitted from lack of care. Here's how to prep and paint chrome.
• What's The Difference Between Chevy 305 and 350 Engines
  (9,442)
  What are the differences between Chevrolet small block 305 cubic inch and 350 cubic inch engines? Bore, Heads and more.
• Panel Matching Real Patina with Faux Patina
  (9,379)
  You thought you'd never, but here you are looking up how to do a convincing faux patina paint job that matches existing panels.
• Recipe For A Hot, Low Budget 318 Mopar Engine
  (9,322)
  Uncle Tony's Garage has about 700 bucks wrapped up in this happy little Small Block. Here's everything you need to duplicate it at home.
• Does Liqui Moly CeraTec Actually Work?
  (9,064)
  The manufacturer claims it will reduces friction and wear, prevents metal-to-metal contact, and reduces fuel consumption. Project Farm tests those claims.
• F100 Crown Vic Front End Swap Step-by-Step
  (9,046)
  The Plan: Get a Crown Vic front-end swap including hooking up the brakes and steering on an F100 truck in a weekend.
• The Supersleeper Project ~ Subaru WRX Powered VW Super Beetle
  (8,948)
  The step-by-step process of a 2009 Subaru WRX powered 1973 Super Beetle bug engine conversion and restoration project.
• 1965 Pontiac Catalina 2+2 Roadster Shop Build
  (8,914)
  This 1965 Pontiac 2+2 rides on a Roadster Shop Fast Track chassis with a fully independent suspension, tubular control arms, and Baer six-piston brakes.
• '72 Buick Riviera SEMA Build by Gas Monkey Garage
  (8,913)
  See the progress so far on the Richard Rawlings led Gas Monkey Garage '72 Buick Riviera "super-build" for SEMA...
• Easy Chassis Setup with the Free TREMEC Driveline Angle Finder App
  (8,858)
  Take the guesswork out of your chassis setup with the free TREMEC Driveline Angle Finder using your smartphone as a measuring device.
• Is Synthetic Motor Oil Better For Your Car?
  (8,808)
  Synthetic oil has fewer impurities and is more resistant to sludge formation, so your engine stays cleaner, operates more efficiently.
• This '56 Bel Air is a Sinister Beast ~ Matte Black Unicorn
  (8,732)
  A multi-sheen murdered-out body, monochrome interior, LS-powered badassery — Meet the Matte Black Unicorn...
• Best "No Welder" Aluminum Welding Rods? Alumiweld vs Hobart vs Bernzomatic
  (8,713)
  Todd tests the top brands of low-temperature aluminum welding or brazing rods for melting point, tensile strength, and other bonding characteristics.
• Which Air Filter is Best? Fram, K&N, Wix, Purolator, AC Delco Showdown
  (8,644)
  Project Farm tests Fram Extra Guard, K&N Performance, Purolator, Wix, AC Delco, and EP Auto automotive air filters.
• From '59 Chevy El Camino to 800-HP Rat Rod
  (8,585)
  We're fairly sure alcohol was heavily involved in the ideation and creation of this wacked-out 1959 Chevrolet El Camino, which goes by the name "Hulk-Camino."
• Which Car Jump Starter Is Best? 17 Battery Boosters Tested
  (8,465)
  Project Farm tests 8 car battery jump starters in Part 1, then tests 9 more battery boosters, each suggested by viewers.
• Budget LS Swapping a Chevy C10 ~ Mounting and Wiring Made Easy
  (8,232)
  Dan is here with another DIY for budget builders, this time all about LS engine swaps on the cheap.
• How To Cleanly Bend Square Stock Box Tube To 90°
  (8,222)
  This simple cutting technique allows for square stock box tube to be bent to a full 90° while maintaining the outer integrity of the tube.
• How To Shorten a C10 Longbed to Shortbed with No Frame Welding
  (8,215)
  Dan at DD Speed Shop has figured out how to shorten a longbed C10 to shortbed without any welding on the frame.
• How To Make a Custom Air Scoop from Scratch and Scrap
  (8,021)
  HardCore Fab makes an air breather for Old Crow, his 1947 Ford Rat Rod project modeled after the old Cadillac style filter housings.
• Upside-Down ~ 1946 Ford 1 Ton Rat Rod Truck Gets Instant Chassis Slam
  (7,895)
  This is Dizzo Martell's 1946 Ford 1 Ton Rat Rod Truck that's built on a chassis flipped upside down and powered by a Nissan LD28 Diesel engine.
• Scratch Built 1957 Chevy Truck RestoMod ~ Snow White
  (7,875)
  Looking to promote their new 1955-59 Chevy truck cabs, Premier Street Rod built a truck that would catch attention at all the biggest events.
• Top 5 Tips For Building Your Hot Rod On A Budget
  (7,816)
  Matt from Iron Trap Garage shares with us his Top 5 Tips for building your hot rod on a budget.
• RATical ~ A Completely Hand-Built Dually Rat Rod Truck
  (7,789)
  Sean Puz's very cool, completely fabricated, dually rat rod truck with 454 big-block bored 30 over and a 4L80e overdrive transmission...
• Rat Rod Header 125cc Mini-Bike Trike Build
  (7,776)
  Red Beard's Garage, after a proper dose of rat rod inspiration while attending the Redneck Rumble, started piecing together their rat rod mini bike build.
• Mighty Metro ~ 1954 International Metro Van Build is Complete
  (7,745)
  Join the crew as they perform Operation Metro Build, a 1954 International Metro van on a custom frame, air-ride, custom interior, and more.
• Making a DIY Louver Press and Louvering a Hood with Bad Chad
  (7,638)
  Hot rod style louvers were needed in hood sides for a build — as you'd expect, Bad Chad creates a DIY Louver Press in a true hot rodder way.
• Bizarre Cars That Were Decades Ahead of Their Time
  (7,562)
  Most people realize that technology you find in modern cars today has actually been around for several decades in older vehicles.
• Ford 9 Inch Rear-End Widths and Potential Donor Cars
  (7,553)
  Hot rodders and drag racers use 9" Ford rear-ends in just about everything — here are 9 inch Ford rear-end widths and donor vehicles.
• Speed Square Hack for Every Welder
  (7,499)
  Turn your generic speed square into a welders speed square in 5 minutes. Here's how.
• How To Make a Custom Brass Knuckle Shift Knob and Handle
  (7,497)
  Karl Fisher shows you step-by-step how to drill, cut, carve and shape a custom brass knuckle shift knob handle from scratch.
• Understanding Hub-Centric vs Lug-Centric Wheel Fitment
  (7,376)
  A common misconception is that wheels are 'hub-centric' or 'lug-centric' — the term properly refers to how the wheel fits onto the vehicle.
• Low Budget 1951 Chevrolet on '99 GMC Jimmy Chassis Swap for $3500
  (7,248)
  Casey’s Customs is chassis swapping a 1951 Chevrolet with an AWD, 6-cylinder 1999 GMC Jimmy donor and has set a budget cap of $3,500.
• DD Speed Shop is Giving Away a 1957 Chevy Bel Air for FREE! Really.
  (7,209)
  DD Speed Shop's Dan bought someone's forgotten '57 Chevrolet Bel Air hot rod out of a field — now he's fixing it up to give it away for FREE!
• 4 Different Ways To Cut and Weld Box Tube Corners
  (7,206)
  Here are several tips from Urchfab on cutting, welding and finishing steel box corners to a seamless finish.
• The Real Speed Racer Mach 5
  (7,199)
  Douglas Sonders got the unique opportunity to photograph and drive the world's only official street-legal Speed Racer Mach 5...
• Clay and Sons MOPAR Salvage: Projects and Part Donor Cars For Sale
  (7,128)
  Clay Kossuth amassed more than 1,200 Mopars in his salvage yard and EVERYTHING is for sale. He’s now retired, but his son will help you...
• How To Remove a Wheel Lug Nut Lock Without a Key
  (7,060)
  Here are 8 ways to remove a wheel lug nut lock without a key, starting off with 3, +5 more from viewer suggestions on 4 different lug lock types…
• How To Put Corvette IRS in a Chevy C10 with DECAlink™ Suspension
  (7,022)
  Scott's 1967 Chevy C10 has a Corvette IRS setup made possible with Detroit Speed's DECAlink™ suspension system. Here's how to DIY.
• Building a Radio Flyer Rat Rod Wagon
  (6,982)
  John and Issac build a shaft-driven Rot Rod go-kart from a Radio Flyer wagon that is Predator 212cc engine-powered. A doable DIY project.
• V8 Swapped 1966 Jaguar Mark 2 ~ Supercharged and Straight Piped
  (6,969)
  This is what happens when an engineer swaps the engine and running gear from a Supercharged V8 Jaguar XJR into the body of a 1966 Jaguar MK2.
• Casey Loter's Tesla Swapped '58 Chevy Apache
  (6,915)
  Casey Loter and Electric 51 Speed Shop started this Chevy Apache EV as a side build, but a Tesla swap was not the original plan.
• I Can't See What I'm Welding ~ Welding Helmet Shade Number Chart
  (6,899)
  Taking the time to find the right helmet for your needs can increase your productivity and weld quality, as well as your comfort...
• Speed Secrets ~ From Junkyard 5.3L to 600HP 383 Stroker Engine
  (6,822)
  How to get Major Power out of a Junkyard 5.3L Engine? Turn it into a 383 Stroker! COMP Cams shows you the way to the 600HP range.
• Bad Chad Marries a 1949 Mercury and 1936 Ford into a Custom Built COE
  (6,712)
  Bad Chad combines a four-door '36 Ford and '49 Mercury into a fully custom cabover truck in his rural shop using his shoot from the hip style.
• HELLRUNNER ~ 765HP Dyno-Tuned Hellcat 1969 Plymouth Roadrunner
  (6,703)
  This stellar 1969 Roadrunner RestoMod gets a 765HP Dyno-Tuned Hellcat powerplant and new chassis, and a whole lot more RestoMod.
• The Gambler 500 Rally is Cheap, Bucket List Quality Fun
  (6,698)
  The Gambler 500 Rally is a mostly off-road rally-style navigational adventure using cheap, impractical or fun vehicles.
• Tri-Five Chevy 4 Door to 2 Door Conversion ~ Quick, Cheap and Easy
  (6,696)
  DD Speed Shops' winter project: the '57 Chevy Bel Air gets a 4 Door to 2 Door Conversion ~ Quick, Cheap and Easy.
• 3 Flux Core Welding Myths and Misconceptions Debunked
  (6,693)
  Flux-Cored Arc Welding (FCAW) is a semi-automatic or automatic arc welding process. Weld.com debunks common myths about flux-core welding.
• 1949 Packard 4x4 Dually Welding Rig ~ 'Rescue Pig'
  (6,631)
  As it's known, Rescue Pig started out as a 1949 Packard passenger car body that was dropped on top of a '96 Dodge RAM truck chassis.
• The Barris Kustoms Built Munster Koach
  (6,618)
  Barris Kustoms created the spooky hot rod dubbed the "Munster Koach" for the hit 1960's TV show "The Munsters" ~ Take a Ride with Dennis Gage.
• How To Remove Mill Scale
  (6,610)
  You need to remove mill scale prior to welding. Mill scale is a pain to get off without impacting the material beneath it.
• How To Clean, Whiten, and Restore a Coolant Overflow Tank
  (6,606)
  Here's a tutorial video showing how to clean and whiten (remove the yellow color) coolant expansion or overflow tanks.
• How To Use A Hacksaw and Select the Right Blade
  (6,604)
  A hacksaw is a fine-toothed saw made for cutting metal, plastics and other materials that can't easily be cut with ordinary saws.
• Rambo ~ Garrett Randall’s Pro-Touring 1970 Corvette
  (6,565)
  Garrett Randall’s pro-touring '70 Corvette Stingray is powered by an LS6 / Tremec T-56 transmission on suspension by Van Steel Corvettes.
• The American Ride ~ A Short Film
  (6,493)
  The American Ride ~ A 1960's themed short film featuring Barney Fife, Grandpa's '55 Chevy, and a host of bitchin' hot rods.
• Old Yeller ~ The Junkyard Racer that Inspired the Shelby Cobra
  (6,437)
  Before sweeping LeMans with the GT40 or building the first Cobra, Carrol Shelby drove this car. You won't find it in any museum, because it's still being raced today.
• Does Lucas Transmission Fix Work?
  (6,435)
  Project Farm tests Lucas Transmission Fix which claims to stop slip, hesitation and rough shifting in worn transmissions.
• Alumaloy ~ Amazon's Cheap Alternative To Expensive Aluminum Welding
  (6,392)
  Imagine being able to repair anything made of Aluminum, Pot Metal and Galvanized Steel using a simple propane torch. No flux! No special training.
• How To Maximize 6.0L LS Engine Performance ~ 10 Mod Combos Tested
  (6,335)
  Richard Holdener explains and dynos 10 different mod combos including a variety of different heads, cams, and intakes for GM 6.0L LS engines.
• 1941 Ford COE Custom Hauler Build
  (6,299)
  Popeye's Rod Shop out of Southern Louisiana spent over a year and a half off-and-on building this spectacular 1941 Ford COE custom hauler.
• This Diesel Motorcycle is Built from Everything... Even the Kitchen Sink
  (6,272)
  With rims from a Camry, a p-trap from a sink, a diesel motor from a cement mixer, this hodgepodge motorcycle is one badass diesel custom...
• Simple Air Suspension Build
  (6,246)
  Jesse Moffitt at Panic Fabrications puts together a simple yet functional air suspension setup on his friend Ethan's truck which is going to be carrying a lot of weight.
• Inexpensive DIY Rust Remover and Paint Stripper Alternative
  (6,154)
  Davin Reckow shows how easy stripping rust and paint and grease and grime can be, with a special ingredient recommended by a dairy farmer!
• How To Make a DIY Garage Heater From a Gas or Electric Clothes Dryer
  (6,147)
  Make a shop furnace or heater from a curb-side freebie gas or electric clothes dryer with little more than the dryer itself.
• Redesigning the 1970 Plymouth Road Runner Superbird
  (6,140)
  The 1970 Plymouth Road Runner Superbird is one of the most unique muscle cars of the 1970s. Here's what a modernized 'bird might look like.
• 1949 Ford Shoebox / 2008 BMW 335i Chassis Swap
  (6,130)
  This chopped, shortened, and wide-bodied 1949 Ford was swapped on top of a 2008 BMW E92 335i N54 twin-turbo car.
• Homemade Metal Working Tools by Halfass Kustoms
  (6,041)
  Halfass Kustoms' shows homebuilt metalworking tools including power hammer, louver press, CNC plasma table, and jig used to drop Model A axles.
• Modernizing the 1967 Chevrolet Chevelle for 2021
  (5,961)
  TheSketchMonkey modernizes the 1967 Chevrolet Chevelle — what would a 2021 Chevelle look like?
• Building a '57 Bel Air 2-Door Convertible From a Cheap 4-Door Hardtop
  (5,934)
  DD Speed Shop is converting a cheap '57 Chevy Bel Air four door hardtop parts car into a two door convertible cruiser.
• DIY Auto Repair Lift and Bay Rentals and Other Garage Spaces For Rent
  (5,805)
  We explain all of your options for space to work on your car — from DIY auto shops and garages to more unconventional alternatives.
• Could You Use A Third Hand In The Shop? DIY Part Holder
  (5,775)
  We've heard it called many things; a third hand, a grasshopper — whatever you call it, you need to make one for your shop. Period. They come in very handy, will often save you in a pinch, and cost almost nothing to make...
• Building a Budget 440 Big Block for a Ratty Challenger
  (5,754)
  Dan at DD Speed Shop battles the elusive 440 Mopar big block, and this motor fought him every step of the way.
• 10 Classic Muscle Cars You Can Still Buy Under $10K
  (5,732)
  Not ALL Classic muscle cars are expensive! Join James as he looks at 10 classic yet offbeat muscle cars you can still buy under $10K.
• Hot Rolled vs Cold Rolled Steel Differences and Which You Should Use
  (5,673)
  What's the difference between hot and cold rolled steel? Andy explains cold and hot rolled steel and what the best uses are for each.
• TH400 to 700R4 Transmission Swap ~ In Depth How To
  (5,670)
  Monster Transmission's original MonStar, Curt, shows how to convert from an original factory TH400 transmission to a 700R4 transmission.
• Frankenwagon ~ 1967 VW Type3 Gets Mazda MX-5 Miata 'Chassis' Swap
  (5,654)
  This Old Jalopy presents Project Frankenwagon: A 1967 VW Type 3 Squareback with a 1990 Mazda MX-5 Miata chassis and drivetrain inside.
• How To Understand, Diagnose and Replace Transmission Mounts
  (5,646)
  A bad transmission mount can prove to be more expensive if not diagnosed through symptoms such as vibration and noise in the vehicle.
• Poppy's Patina Clear Coat Wipe or Spray-On Protection in Matte or Gloss
  (5,633)
  This clear coat product is a very simple wipe-on (or optional spray-on) application that provides beauty and depth to all patina surfaces.
• Essential Fabrication Tools ~ DIY Plate Dog and Wedge
  (5,630)
  Every Fabricator should have a plate dog and wedge in their toolbox. If you don't, here's how to build some from nothing but scrap material.
• 3M Tech Tip ~ How To Cerakote Engine Parts
  (5,585)
  Cerakote is Perfect for high heat areas and easy to coat engine parts using 3M Scotch Brite, the 3M PPS paint system.
• How To Create Crazy Power on a Cheap 5.3L Vortec with Minor Upgrades
  (5,551)
  Starting with a cheap high-mileage 5.3L Vortec engine, the crew makes as much horsepower as they can, spending as little money possible.
• Order Original Dealer Invoice and Build Sheet for Your Classic GM Vehicle
  (5,540)
  The collection covers most US cars and trucks from the mid-70s on. Vehicle Invoices are printed from microfilm or microfiche and sent as PDF.
• How To Install A ($25) Shift Kit And Wake Up Your TH350
  (5,522)
  Working through a $100 Craigslist TH350 find and turning it into a stout shifting transmission for a '75 Pontiac Firebird.
• Big Block Wars ~ 454 Chevy vs 455 Pontiac vs 455 Olds vs 451 Mopar
  (5,503)
  Four Classic American Muscle engines in one video! Lucore dynos big-block engines from Chevrolet, Pontiac, Oldsmobile, and Mopar...
• Basic Tools of Metal Finishing ~ How To Use a Hammer and Dolly
  (5,500)
  A hammer & dolly are basic tools for bumping, peening, and finishing metal. Here's how to use them together to straighten auto body sheet metal.
• Zoomies ~ How To Fabricate Custom Headers
  (5,484)
  MarsFab Offroad and Fabrication builds a set of custom zoomie headers for a classic Ford pickup with a 700 HP blown small block Chevy engine.
• Are Racecars Dead? Understanding the RPM Act and EPA Clean Air Act
  (5,462)
  The RPM Act is common-sense, bipartisan legislation to protect Americans' right to convert street cars, trucks, motorcycles into racecars.
• What Rotisserie? DIY Wooden Body Tip-Over Jig
  (5,459)
  Building a wooden tip-over jig in place of an automotive rotisserie with dimensional lumber and plywood for under $150.
• Thinking About Driving The Hot Rod Power Tour?
  (5,455)
  The 26th HOT ROD Power Tour will continue in 2020 with exciting new features ~ Here's what it's like and why you should do it.
• 3 DIY Driveway Cleaning Methods to Remove Oil Stains are Tested
  (5,452)
  What is the best way to remove an oil and grease stain from a driveway? 3 DIY Driveway Cleaning Methods are Tested.
• The Holey Goat's OG 1970 Pontiac GTO 400ci Engine ~ Can It Be Saved?
  (5,422)
  Dalton finally tears into the original, numbers matching 400ci Pontiac V8 out of the abandoned and abused 1970 GTO.
• Scratch-Building Hot Rod Floor Pans
  (5,418)
  Working with a hand crank bead roller, Dan churned out some top quality panels in a matter of minutes from paper templates.
• Ford F100 Interior Makeover ~ Floor Patch, Paint, Carpet, Dash, and More
  (5,381)
  The seats, carpet, and dash pad get replaced in this 50yr old Ford F100. The floor gets patched and the interior gets a fresh coat of paint.
• Easy DIY Homemade Jack Stand Ideas
  (5,381)
  Jack stands are important and building them yourself is cheap and you can make them fit your exact applications.
• How To Remove a Stuck Brake Drum
  (5,373)
  ChrisFix goes through the process step-by-step so that anyone can remove a stuck brake drum.
• Danny Trejo and his 1965 Buick Riviera on Jay Leno’s Garage
  (5,314)
  Jay Leno checks out Danny Trejo’s interesting car collection and the two go cruising in Danny's 1965 Buick Riviera.
• J.R Drake's 1932 Ford North Carolina State Prison Bus
  (5,290)
  This is J.R Drake's 1932 Ford Prison Bus Rat Rod which was built by the Kick Ass Rod Shop in Hickory, North Carolina.
• How To Build a DIY Paint Booth in Your Driveway
  (5,289)
  Mike Finnegan builds a paint booth in his driveway with an E-Z Up Canopy, box fan, some painter's plastic, and duct tape.
• What is the Best Spark Plug Design?
  (5,280)
  Project Farm tests E3, Pulstar, Autolite Racing, NGK Iridium, and NGK Copper spark plugs for fuel efficiency, performance, and each was visually observed for burn characteristics.
• 55HP 670cc Harbor Freight V-Twin Engine Rail Kart Dragster Revival
  (5,277)
  Reviving a 60s inspired mini drag rail-kart with a modified 55HP Harbor Freight 670cc V-Twin engine and some 1/8 mile drag action.
• How to Apply Rust Encapsulator Plus to a Rusty Rear End
  (5,274)
  In this video, Joe removes heavy rust, dirt, and grime so he can apply Rust Encapsulator Plus to a Camaro rear end.
• Universal Fit Vintage Style Window Swamp Cooler A/C Unit
  (5,259)
  These replica swamp coolers give your ride that vintage look. Great for those who don't want to pay the big bucks for an original unit.
• How To Wrap Your Old Car in a New Look
  (5,258)
  You don't have to buy a new ride to get a new look. You can transform the appearance of their vehicles quickly, easily, and affordably.
• How To Stick Weld ~ Shielded Metal Arc Welding (SMAW) Beginner Basics
  (5,255)
  Here's everything that you need to know when starting out with Shielded Metal Arc Welding (SMAW), more commonly known as stick welding.
• Spirit of Aasen ~ 1953 Volvo PV 800HP 2JZ Swapped Drift Monster
  (5,245)
  Stig Arne Solheim built this 1953 Volvo PV444 with a 3.4 L 2JZ-GTE inline-six with a stroker kit, forged internals, and CNC ported head.
• How to Build a Tubing Bender
  (5,235)
  This project is a great entry-level project that will help you practice your fit up skills, tack welding, MIG Welding, TIG Welding, metal finishing, painting, and tube bending.
• Derek McDonald's 1963 International Harvester Crewcab Travelette
  (5,176)
  The luggage rack'd '63 IH Travelette sports a custom chassis, new upholstery, interior, wheels and tires, and many custom designs and mods.
• How To Metal Etch and Mark Your Tools
  (5,169)
  How to etch large-sized numbers onto sockets and tools so you can actually see what size they are using a simple battery.
• One-Owner 1937 Willys Coupe Parked Since 1968 Gets Full Restoration
  (5,167)
  This 1937 Willys coupe received a stock restoration after sitting since the 1960s and still retains its original engine & transmission.
• Which Truck Bed Liner is Best? Roll-On and Spray-On Bed Liners Tested
  (5,140)
  Project Farm tests both roll-on bed-liner and spray-on bed-liner coatings to determine which brand is the best.
• Ford, GM, Mopar, Other Project & Part Cars For Sale near Wichita Kansas
  (5,132)
  Mr. Goodpliers tours a private collection near Wichita Kansas that has 150+ 1930s, 40s, 50s, 60s & 70s project or parts cars and trucks for sale.
• Abandoned '73 Dodge Challenger Rescued, on the Road After 35 Years
  (5,115)
  This factory 318 3-speed is in desperate need of a new home. Follow along as this beautiful muscle car gets put back on the road.
• Preserved Patina: Mark Parham’s 1961 Chevy Apache 10
  (5,115)
  To the average person, Mark Parham’s ’61 Chevy Apache 10 looks like a weathered farm truck long overdue for a paint job. But, to a keen-eyed truck enthusiast, it’s an absolute work of art.
• How To Insulate Your Garage Door
  (5,102)
  Metal garage doors block strong winds but do little to maintain a comfortable temperature. Heres how to insulate your garage door.
• GM Vehicle Information Kits ~ Download Original Specification Sheets
  (5,080)
  Download GM Vehicle Information Kits free of charge. Kits contain basic vehicle specifications, equipment, owners and service information.
• Plywood Fixture for Hand Shaping a Sheet Metal Dome
  (5,073)
  via The Garage Vlog ~ A wooden fixture is created to shape 20 gauge sheet metal into a dome by hand.
• Tour 600+ Project Cars & Trucks For Sale at Willie's Salvage in Oklahoma
  (5,070)
  Tour Willie's Salvage, an operation with 600+ project cars, trucks and part donor vehicles for sale in Earlsboro Oklahoma.
• 1941 Cadillac Coupe Gets One-Off Chassis, Northstar Power, New Face
  (5,014)
  This custom one-off Northstar powered 1941 Cadillac 2 door coupe was built from the bottom up by Tucci Hot Rods of Marcy, NY.
• 1939 Chevy Rat Rod Packs a Blown LS, Holley EFI, and AC
  (5,011)
  Conor Sheffield’s 1939 Chevrolet rat rod is completely home-built. It packs a 6-71 supercharged LS engine and rocks an AC system.
• How to Detail Your Car Like a Pro in Minutes
  (4,995)
  Assuming you don't have a week to dedicate to detailing, here are tips & techniques for prepping your ride in a hurry, or on-site at a show.
• Upgrade Stock Small Block Cast-Iron Exhaust Manifolds To Hooker High-Flow
  (4,989)
  If your goal is more power with a classic appearance, Hooker small-block Chevy cast-iron exhaust manifolds are just the ticket.
• Acid Dip Process Explained ~ Acid Dipping a 1967 Mustang Fastback
  (4,951)
  Evan at takes a look at the acid dip process for classic cars, showing his 1967 Mustang Fastback getting acid dipped from start to finish.
• Popular Manual Transmission Dimensions
  (4,943)
  T5, T10, T56, A-833, Toploader Transmission Measurements $(document).ready( function () {$('#dtTable').DataTable( {paginate: false} );} ); ModelABCDEF GM Super T10, Muncie, Saginaw6.3"14.2"23"N/AN/A3.75" GM T5...
• 1946 Chevy Rat Rod Truck ~ A Rolling Tribute to Veterans
  (4,940)
  via Combustion Chamber ~ This 1946 Chevrolet Truck is more than just a rat rod — it is a rolling memorial to our nation's Veterans...
• Adam Savage's One Day Builds: Workshop Hardware Storage
  (4,928)
  Adam revamps his hardware storage system by building a new custom wall of storage bins for nuts, bolts, and all manner of hardware.
• Welding Patch Panels with a Harbor Freight 125 Flux Core Welder
  (4,926)
  Chicago Electric Flux Core 125 Welder from Harbor Freight is used to weld an automotive patch panel into place, repairing a fender rust hole.
• '64 C10 Chassis Swap To C30 Tow Truck on Air with 6.6 Duramax
  (4,891)
  Deboss Garage swaps a LB7 Duramax into a 1964 Chevrolet C10 pickup truck acquired on trade, frame swaps the truck to a C30, adds air ride, and crafts a 'Vintage' tow truck bed for it...
• Rat Rod Quad ~ Predator 420cc Powered ATV
  (4,888)
  A Predator 420cc powered ATV — Ike bought an old Polaris for cheap because it had a seized engine, and the guys swap a Predator 420cc engine into it.
• Cannonball Run Record Breakers: How we made our car invisible to cops...
  (4,887)
  The New York to Los Angeles Cannonball Record has just been broken. Here's the story of the 2015 Mercedes-Benz E63S AMG they used to do it...
• How To Get Started Welding For Dirt Cheap
  (4,882)
  Two amateurs learn to weld with a $100 Harbor Freight Flux 125 flux core welder.
• 1955 International COE Hauler Chassis Swap Build
  (4,863)
  1955 International Cab Over was dropped onto a 425 Cadillac FWD chassis. The sleeper was chopped, narrowed and shortened to fit the cab.
• How To Install a Tachometer
  (4,851)
  Tachometer installation can be as simple as connecting the tach’s sending wire to the negative side of the ignition coil, while other ignition systems feature a dedicated tach sending circuit.
• There's an LS Engine Swap for Every Build Budget
  (4,844)
  The Chevrolet LS Engine is an attainable, usable engine. Here are your donor vehicle options depending on your build or engine swap budget.
• An Insanely Easy Torch Cutting Hack For Perfect Cuts
  (4,838)
  This quick and easy cutting hack will help you make perfect oxy/acetylene torch cuts.
• 1930 Ford Model A Coupe Hot Rod
  (4,822)
  This coupe has been chopped 4¼”, channeled 4″, sports 2nd Gen Corvette IRS, a Borg-Warner Super T-10 4-speed transmission, custom home-garage paint, pleated interior, and hand-built wheels...
• How To Do A Wheel Alignment With String
  (4,817)
  Fitzee's Fabrications demonstrates a simple way to do a wheel alignment yourself, at home, with just 4 jack stands and a length of string!
• Ken Block's Ultimate Home Garage
  (4,813)
  Ken Block gives a tour of his dream garage setup in Park City: a streetable Ford RS200 Group B relic, a slew of specialized mountain bikes, a Can-Am with a bike rack to carry it all, a workbench, stocked Monster fridges, and way more...
• Ford Automatic OverDrive vs AODE vs 4R70W
  (4,806)
  Autorestomod takes a look at the different choices in Ford Automatic OverDrive (AOD) transmissions.
• Making a Carter/Edelbrock AFB AVS Carburetor REALLY Work For You
  (4,786)
  The Carter/Edelbrock AFB/AVS carburetors are decent out of the box, but learn to tune the fuel metering system to make them really come alive!
• Steve McQueen’s ‘Bullitt’ 1968 Mustang GT sells for $3.74M at Auction
  (4,773)
  The original 1968 Mustang Bullitt car from the movie crossed the Mecum auction block on January 10th selling for $3.74 million.
• Building a DIY Hidden Hitch Receiver
  (4,764)
  Puddin's Fab Shop builds a hidden trailer hitch receiver for occasional use on the International Travelall project.
• Foose on Design ~ Redesigning the Chevrolet C5 Corvette
  (4,754)
  To see what might be possible with this 21st-century fiberglass sports car, Hagerty asked Chip Foose for his take on the design.
• How To Make 120hp Feel Fun ~ 1963 Beetle from Jay Leno's Garage
  (4,752)
  With a heavy focus on aesthetics and style, Chris Walters from Jay Leno’s Garage built himself a clean weekend cruiser out of his ’63 Beetle.
• How To Repair a Cracked Steering Wheel
  (4,751)
  If you have a ragged old steering wheel and can’t find a replacement, you can refresh it instead with the right tools and supplies.
• Top 10 Beginner MIG Welding Questions ~ What You Need to Know
  (4,741)
  MIG is considered one of the easier methods of welding, so it's no shock that many people pick one up when they get their first project car.
• 1965 Mercedes 190 with BMW E30 Turbo Engine Swap ~ Classy Sleeper
  (4,727)
  This 1965 Mercedes-Benz 190D has had it's Diesel removed and has been swapped up to a modern BMW E30 turbocharged powerplant.
• Rebuilding a 1970 Chevy Camaro RS/SS L78 396
  (4,718)
  MuscleCar takes on an all-new project: restoring a 1970 Camaro RS and transforming it into a stock-style RS/SS L78 396.
• New Cannonball Run Record ~ New York to LA in 27 Hours 25 Minutes
  (4,690)
  Three guys you've probably never heard of recently broke the New York to Los Angeles run referred to as the Cannonball.
• Dropping an 1,100 HP 1972 Mercury Marquis
  (4,687)
  Adding an indestructible 9-inch Ford rear-end and air suspension to our sleeper 1,080-horsepower 1972 Mercury Marquis Brougham.
• Nostalgia Street Rods ~ The Most Expensive Car Collection In Las Vegas
  (4,684)
  Steve Darnell takes you through the Nostalgia Street Rods collection of automobiles in Las Vegas that features vehicles from 1910 to 1965.
• How To Determine Suspension, Brake, and Wheel Clearance
  (4,682)
  When working with suspension, wheels, and brakes, getting the right wheel clearance is key. Follow these easy steps to calculate offset and wheel clearance.
• The Other Pontiac ~ This is One Sinister '67 Tempest
  (4,669)
  This sinister '67 Tempest sports a naturally aspirated 455 with 6X heads which makes it a capable, and quite fun cruiser.
• Thrift Rat ~ A Steampunk Inspired 1954 Chevy 3100 Thriftmaster
  (4,661)
  With tons of custom steampunk inspired touches, this pickup truck isn't your ordinary Chevrolet 3100 Thriftmaster.
• Which Diesel Anti-Gel Additive is Best?
  (4,660)
  Project Farm tests several diesel fuel anti-gel additives to determine which is the best...
• Chip Foose Dream Chevelle Combines Best of '70 and '71 Models
  (4,647)
  Chip Foose makes his dream Chevelle by starting with the 1970 model and adding elements from the 1971-1972 model.
• How To Find Top Dead Center
  (4,636)
  Finding top dead center is a crucial step when installing a distributor, timing set, or valvetrain components and is also helpful for many other procedures...
• Converting A Stock 1967 Mustang Coupe Into An Iconic Fastback
  (4,624)
  Mustang guru Alan Shepley and crew perform major cosmetic surgery converting a stock 1967 Mustang coupe into an iconic fastback.
• Vapor ~ 1965 Ford Mustang E-Force Supercharged 5.0 Coyote Build
  (4,619)
  A ferocious, 785hp RestoMod '65 Ford Mustang with a Coyote crate motor with Edelbrock’s latest and greatest E-Force supercharger...
• Complete Tri-5 Chevy Front Suspension Rebuild & Brake Upgrade for $550
  (4,619)
  Dan shows us his best solutions for rebuilding the front suspension at home as well as replacing and upgrading to front disc brakes.
• First Look: Radical 'Rough Cut' 1957 Chevy Bel Air from ITW Hot Rods
  (4,612)
  ITW's Chris walker is breaking all the rules again and hacking up a '57 Chevy Bel Air into bite-sized pieces for his latest creation dubbed 'Rough Cut'.
• How To Keep Your LS Engine Healthy While You Beat The Snot Out Of It
  (4,609)
  If you're planning to beat the ever-loving snot out of your LS engine, consider these modifications to make it reliable in extreme and competitive circumstances.
• Can you REALLY Read a Tape Measure?
  (4,604)
  Whether you're a professional just getting started, reading a tape measure correctly is key to parts that fit and solid results.
• Watts-Link Geometry Explained
  (4,597)
  The advantage of the Watts Link design is that it can keep the axle centered throughout the entire travel range of the suspension. Here's how it works.
• Project Pictorial: Making Bomber Seats and Frames
  (4,584)
  Owen Jeancart's photo journal of Bomber Seats crafted from .063 aluminum for Warhawk, a 1931 Model A inspired by WWII Curtiss P-40 Fighters.
• Testing the Craftsman Hand Tool Lifetime Warranty and Return Policy
  (4,575)
  Will Lowes or Ace Hardware swap $200 in broken Craftsman lifetime warrantied tools that were not purchased there, and without a receipt?
• Who Says Real Mechanics Don't Wear Gloves?
  (4,570)
  Mechanics should consider wearing gloves — and not just to keep their hands clean — automotive work can lead to some nasty chemicals.
• Steering Wheel Restoration and Cracked Steering Wheel Repair
  (4,567)
  This video how-to shows you how to use Polyvance's PlastiFix repair kit to restore cracked classic steering wheels.
• This 1964 Buick Riviera is a Stealth Custom
  (4,547)
  Dennis Gage spotted this sleek, stealth Buick Riviera with custom wheels, paint, and taillights at Cruisin' the Coast. Here's a closer look.
• Stop Welding In the Dark with a $7 Welding Hood Mod!
  (4,532)
  Make Everything shows you a super simple mod for your welding hood that will change the way you work in dark or confined spaces!
• CHEVMOWLET ~ Farmtruck and AZN's Drag Racing Lawn Mower
  (4,519)
  Farmtruck takes on AZN in a heads up best 2 out of 3 race to give a new and improved Chevmowlet a good shakedown.
• 5 Tips To INSTANTLY Make Better Looking Welds
  (4,510)
  Here are 5 solid tips to get instantly get cleaner welds and pointers on how you can get a cleaner finished product.
• 9 Fabrication Tips/Tricks In 9 Minutes
  (4,496)
  Justin Voss demonstrates nine fabrication tricks/hacks in nine minutes.
• Tim Allen's Entire Car Collection ~ Celebrity Garage Tour
  (4,489)
  Tim Allen is a genuine hot rodder and enjoys building cars and driving fast. In this 2-part tour, you'll see all of Tim's full car collection.
• A BMW Builder's 600hp Custom 1971 Chevy C10 Pro-Touring Truck
  (4,482)
  Chris set out to build his own ride, a 1971 Chevrolet C10 and built a totally wicked ride that handles even better than his BMW E46 M3.
• Sacrilege ~ Classic Car Low-Ballers Make Seller Crush '70 Dodge Charger
  (4,465)
  Classic Dodge Charger owner willfully crushes his car to send a message to prospective buyers that have just “jerked [him] around” is blowing up across Mopar pages and muscle car enthusiast groups on Facebook.
• Daddy Crab's $5000 '29 Ford Rat Rod at Cruisin' the Coast
  (4,458)
  Dennis Gage checks out a "slightly" modified rat rod that's been budget built from a 1929 Ford truck spotted at Cruisin' the Coast.
• 1963 Ford Thunderbird Redesign for 2020
  (4,457)
  The Ford Thunderbird debuted in 1954 and stretched over 11 model generations. What if Ford took the 1963 Thunderbird and built it today?
• 1929 Ford Model AA WWII-Era Home-Built Doodlebug Tractor
  (4,434)
  Take a walk around an old WWII-era home-built Doodlebug farm tractor made from a 1929 Ford Model AA truck.
• How To Build Your Own Epic Bobber For Around $4,000
  (4,429)
  Moto Pilots' most challenging bike build yet — 1980 Honda CB650 and morphing it into a jaw-dropping Old School bobber for $4,000 all in.
• James Hetfield's Car Collection at the Petersen Automotive Museum
  (4,420)
  James Hetfield of Metallica fame has always been a car guy and shares his car journey to one of the coolest custom car collections around.
• Custom Built 1955 Chevrolet Nomad Wagon dubbed “Gone Mad 55”
  (4,404)
  This custom 635hp 1955 Chevrolet Nomad Wagon restomod was built by Classic Car Studio and dubbed the “Gone Mad 55”.
• Building The Ultimate Jerry Can Tool Box
  (4,403)
  Hassan Abu-Izmero aka HABU demonstrates turning a simple Jerry Can into The Ultimate Tool Box...
• How To Rehab a Home Garage into an Inexpensive DIY Paint Booth
  (4,399)
  This DIY garage to paint booth conversion was done with only $400 in materials to prepare the space, and $300 in air and paint supplies.
• There's Budget Home-Built Badassery in this Old School '67 Ford Mustang
  (4,342)
  Gabe is not a builder or fabricator and was able to put this stellar Mustang together in his home garage over a period of time.
• River Find ~ Corvette Found and Rescued (kinda) at Boat Launch
  (4,339)
  They have no idea how long the car has been in the river but succeeded in pulling the sunken Chevy Corvette classic car out of the river...
• Easy DIY 4 Lug to 5 Lug Hub Conversion
  (4,328)
  How to do a 4 to 5 lug conversion on a Nissan 240sx, but this process applies to any 4 lug car ~ or 5 or 6 lug car or truck, for that matter.
• The Ultimate Shop Truck ~ A 1970 Buick Estate Wagon?
  (4,326)
  In need of a truck to move his family and project car collection across the country, a rare 1 year only 1970 Buick Estate Wagon was selected.
• Rusty Goat ~ LS Swapped 1964 Dodge D300 Pickup
  (4,325)
  It took 2 1/2 years to build, and there's not anything that has not been touched on this '64 Dodge Sweptline D300 Pro-Touring truck.
• The In's, Out's, Do's, and Dont's of Being a Parts Hound with Stacey David
  (4,315)
  Stacey David devotes an entire episode to everything you need to know when you're out hunting for that perfect swap meet or junkyard deal.
• Debadging ~ How To Remove Automotive Emblems and Badges
  (4,303)
  Debadging is stripping a vehicle of emblems and badges for a clean look popular on hot rods, street rods, and tuners...
• Dodge's Pièce De Résistance ~ 1968-1970 Dodge Coronet
  (4,291)
  When Dodge released the 1968 Coronet, it had no idea that it had created a legend, one of the best cars produced during its golden era.
• How and Where To Swap and Replace Broken Hand Tools
  (4,280)
  An overview of tool brand company warranty, return process, customer service contact information, and drop-off and return location finders.
• Plasma Cutting 101 ~ Introduction to Plasma Cutting
  (4,270)
  Plasma Arc Cutting machines are so affordable now that even a lot of home hobbyists have started using them in their home garages.
• Old Tire Size Guide: Radial, Poly/Fiber, Bias-Ply, Cheater and Drag Slicks
  (4,252)
  A comprehensive list of Radials, Poly/Fibers, Bias-Ply's, Cheater Slicks and Dragster Slicks — each original tire size is listed — and each of the related measurements is charted.
• DIY Budget Cylinder Head Rebuild
  (4,248)
  These tips will work on SB or BB Chevy, Ford and Mopar engines - pulling valve stem seals, removing valve springs, lapping valves, checking valve seat seal, cleaning aluminum heads and more...
• How To Measure, Cut, Fit, and Weld Automotive Patch Panels
  (4,234)
  Lakeside Autobody focuses on measuring, cutting, fitting, and welding homemade, DIY automotive sheet metal patch panels.
• The Ultimate 3/8” Drive Ratchet Driver Torture Test
  (4,227)
  YouTuber ClientGraphics conducts the ultimate showdown of hand tool destruction and finds the strongest ratchet brand.
• Rockabilly Reunion 2021 ~ Classics, Pin-Ups, Rat Rods in Lake Havasu
  (4,220)
  Duke and Lola traveled to Lake Havasu, Arizona to check out the 2021 Rockabilly Reunion featuring classics, bands, pin-ups, and shenanigans.
• How To Choose The Right Twist Drill Bit For The Job
  (4,219)
  Andrew Harnett on twist drill selection, pros and cons of high-speed steel, cobalt, carbide, plus coatings, drill point, flute geometry, and more.
• 1932 Ford Gasser Barn Find ~ Legit Drag Racing History Revealed
  (4,213)
  Imagine a 1932 Ford three-window coupe Gasser in a chicken house. Now imagine that it has deep drag racing history that goes back to 1957.
• 1930s to 1980s Project Vehicles and Parts For Sale in Great Bend, Kansas
  (4,211)
  Nobody Else’s Auto LLC in Great Bend, Kansas spans 20 acres ~ 1,500 vehicles and massive parts stash in 20,000 Sq Ft under roof.
• Grinder Safety ~ How to Properly Use an Angle Grinder + FAILS!
  (4,203)
  Grinders are one of the most dangerous and misused tools in many shops. Most injuries can be avoided by following the simple steps we covered in this video. Watch the whole thing, stay safe, and forward this to a friend...
• Sinister Slammed '68 Chevy C10 ~ Backyard-Built by Brothers
  (4,201)
  Shawn Davis meets up with Martin Guero and his badass '68 C10, an original shortbed Chevy that was backyard built with Martin's brothers.
• 2021 National Street Rod Association NSRA Event Schedule
  (4,186)
  1,000s of street rods, customs, muscle cars and street machines hit the National Street Rod Association regional and national shows each year.
• DIY Multi-Use Tool Stand for Basic Metalworking Tools
  (4,156)
  DIY Multi-Use Tool Stand for Metalworking Tools ~ Bead Roller, Shrinker/Stretcher, Shear, Planishing Hammer.
• The Shiners (2020) ~ Full Movie
  (4,138)
  A Street Race is set up between two small-town rivals. The Take? Two Cases of moonshine and a little cash. A cat and mouse game between the Shiners and Barney makes this one an unforgettable classic.
• DIY Welding Cart Built Around Harbor Freight Tool Cabinet
  (4,130)
  From Start To Finish, here's how to fabricate a DIY welding cart built around a Harbor Freight 14.5" End Cabinet Toolbox.
• 10 Techniques That Will Make You A Better Driver
  (4,119)
  Bad drivers, poor decisions, and potential hazards exist with every turn of the steering wheel. Here are 10 tips to make you a better driver.
• Supercharged 1964 Chevrolet Chevelle Malibu SS LT4 Build
  (4,094)
  via Hand Built Cars ~ Supercharged 1964 Chevrolet Chevelle Malibu SS LT4 Build by the Roadster Shop in Mundelein, Illinois...
• How To Clean and Sharpen a Dull Metal File
  (4,085)
  When your go-to file is worn and not cutting its time for chemical cleaning and sharpening and it's probably a lot easier than you imagine.
• 1934 Ford Dirt Track Racecar Resurfaces After 50+ Years
  (4,074)
  This is a 1934 Ford five-window coupe, and it has some awesome vintage dirt track racing details, a center seat arrangement and more.
• How To Choose a Hot Rod High-Amp Alternator
  (4,063)
  Determining the alternator amperage required is the current draw, plus any future accessories you plan to add.
• WelderUp's Haunted '55 Chevy from Charles Manson's Ranch
  (4,055)
  This Steve Darnell and WelderUp built 'Haunted Rod' is a 1955 Chevrolet that was found on Charles Manson's ranch.
• Joey Logano Shows Off His Ford Collection
  (4,045)
  2018 NASCAR Cup Series Champion Joey Logano shows us 11 awesome Ford cars from his collection at his personal shop in North Carolina.
• Ron Covell's Tips for Using Aviation Snips
  (4,036)
  Ron Covell shows the details of using aircraft snips with ample demos of how they are used to make clean cuts without distorting the metal.
• HVLP Paint Spray Gun Basics Explained + How To Setup and Spray
  (4,023)
  Tom Stringham clearly explains HVLP Paint Spray Gun basics, demonstrates tear down and shows how to set up and spray.
• How To Grind Inside Corners
  (4,022)
  Several methods are demonstrated; file, die grinder, and curved flap disc, to show you how to properly deal with inside corner grinding.
• Volvo Amazon Kia Spectra Swap ~ Swedish Gangsta Sled by Svenmeister
  (4,020)
  The Svenmeister's latest custom car build is a classic Swedish Volvo Amazon 122S crafted atop a 2005 Kia Spectra.
• Father and Son Built 1933 Ford 5-Window Coupe Hot Rod
  (4,017)
  Father and Son Chris and Dean Niederkrom built their 1933 Ford 5-Window Coupe Hot Rod together. This is the story of why they drive.
• Sheet Metal Cutting and Grinding Tools with Fitzee's Fabrications
  (4,007)
  Fitzee discusses and demos sheet metal tools he's used for 30 years, as well as the 21st Century cutting and grinding tools he uses today.
• Davey Hamilton's Ass-Backwards '52 Ford Pick-Up Truck
  (4,005)
  A former race car driver has built a one-of-a-kind 1952 Ford pick-up truck — that drives Backwards!
• 2021 Jalopy Showdown at Lincoln Speedway
  (3,991)
  HRW fueled up the coupe and rolled to Lincoln Speedway for the 2021 Jalopy Showdown to benefit the Eastern Museum of Motor Racing (EMMR).
• How Ignition Timing Works: Understanding Vacuum & Mechanical Advance
  (3,988)
  Ignition timing is essential to proper engine performance and in this video, MSD explains exactly how it works.
• Making Sand Cast Aluminum Car Club Plaques
  (3,986)
  First, a 3D printer to made a copy of the plaques, then make a mold using Petrobond sand. Aluminum is melted and poured into the molds.
• Dylan's 1954 F100 ~ An Early 1960s Style Build
  (3,982)
  Check out Dylan's High School hot rod, a 1954 F100 done in an early '60s style that he started when he was 14 years old.
• Go French! Install Frenched Headlights with DIY Weld-in Bucket Kit
  (3,981)
  Autoloc’s Frenched Headlight kit is easy to install and adds a special look. Here is how to weld in the buckets and install the kit.
• The Ultimate MOPAR Hoard ~ Trailers Full of Muscle Car Parts (for sale)
  (3,973)
  Frank Parks has nearly 100 vehicles and hundreds of thousands of parts tagged and stashed away for safekeeping. But he does sell.
• Chevy, Ford, Dodge, and IH Truck Cabs For Sale in Great Bend, Kansas
  (3,942)
  Nobody Else's Auto LLC has Chevrolet, Ford, Dodge, International, and Diamond T truck cabs for sale in Great Bend, Kansas.
• 16th Annual Jalopyrama Hot Rod Show ~ Woodies, Wagons, and Tubs
  (3,940)
  There are a few great car shows that start off the season for folks in the North East, and Jalopyrama is always an amazing show.
• Putting New(er) Wheels on Older Cars and Trucks with ET Lug Nuts
  (3,939)
  If you're planning on putting new wheels under an older vehicle, especially from the early 70s or older, wheel stud length can be an issue.
• Making a Mechanical Trash Bin from an Old Gas Bottle
  (3,935)
  Convert an old gas bottle, some scrap metal and a couple of Heim joints to make a foot-operated mechanical trash bin for the workshop.
• DIY Drill Powered Spray Paint Can Shaker
  (3,933)
  This DIY Spray Paint Can Shaker takes just minutes to make and couldn't be any easier. There is no welding, no special tools, just simplicity!
• WelderUp's 2-Stroke '58 Chevy Apache Monster Truck Build Bio and Drive
  (3,923)
  This is a full bio of Steve Darnell's 2-Stroke themed 1958 Chevrolet Apache Monster Truck including build bio and drive.
• How To Make A Battery Tray With Simple Tools
  (3,914)
  Fitzee's Fabrications demonstrates how to make a battery tray with recycled metal and simple tools and a no-nonsense approach.
• 1966 Shelby Mustang GT350H Found in Ohio Backyard After 40 Years
  (3,909)
  This one is gold, baby — black with gold stripes, the Shelby Hertz "Rent-A-Racer" dream machine.
• How To Make DIY Gaskets From Scratch
  (3,907)
  Kyle Smith gives you offers tips and tricks to make your gaskets using a kit from your local auto parts store and everyday household items.
• Fast Freddie's '69 Dodge Dart GTS RestoMod Build
  (3,900)
  This 1969 Dodge Dart GTS gets the full RestoMod treatment ably executed by Fast Freddies Rod Shop. Take a look at this proper build.
• Popular V8 Engine Swap Dimension Chart ~ Will your engine choice fit?
  (3,897)
  Specs include overall height, length, and width of a fully dressed engine - oil pan, intake, carburetor, front accessory drives, and exhaust.
• How To Make a Wooden Slapper ~ DIY Metal Shaping Tool
  (3,895)
  Wray Schelin from ProShaper Workshop demonstrates how to make a leather-faced wooden slapper for metalwork and shaping.
• 1938 Pontiac Coupe Hot Rod Build From Start To Finish
  (3,886)
  The transformation from bush rot '38 Pontiac Coupe to slammed LS-powered hot rod took Halfass Kustoms around 7 months of spare time to build.
• Best Impact Driver? DeWalt vs Milwaukee vs Makita vs Bauer
  (3,872)
  Todd at Project Farm tests Impact Drivers from Milwaukee, DeWalt, Makita, and Bauer, but not all impact drivers survive this showdown.
• Deplorable ~ 1934 Renault Outlaw Gasser at Holley Hot Rod Reunion
  (3,869)
  This is Deplorable, a 1934 Renault Outlaw Gasser built by Renegade Race Cars and spotted at the NHRA Holley Hot Rod Reunion...
• New Arrivals: Ford Chevy GMC Oldsmobile and Studebaker Near Wichita
  (3,869)
  We tour New Arrivals at Rust Rach near Wichita Kansas with 150+ 1930s, 40s, 50s, 60s & 70s projects or parts cars and trucks for sale.
• The Story Behind Fuzzy Dice
  (3,868)
  A walk around any cruise night or car show you'll see fuzzy dice. These retro throwbacks have been swinging from rearview mirrors for decades. Heres the story behind them.
• MIG Welding for Beginners ~ Three Basic Welds You Should Know
  (3,864)
  Joe goes over the three basic MIG welds — stitch weld, plug weld, and normal weld — that you should know when working on a project vehicle.
• 1956 Chevrolet Bel Air Restomod Project by Chip Foose Design
  (3,860)
  Chip Foose and the Foose Design team are restomoding Victor's 1956 Chevy Bel Air with a chassis swap and LS Engine.
• 1965 Buick Riviera ~ Low and Slow Custom Cruiser
  (3,855)
  Andy's 1965 Riviera is Buick badassery from the clean and classy shaved body to the custom interior all slammed on air suspension.
• Chasing Dreams and Stormin' Bonneville
  (3,849)
  After 13 years Lucky Burton has set a plan to finally get this project done and achieve his goal of taking it to the Bonneville Salt Flats.
• Installing a Remote Air Compressor and DIY Switch, Gauge and Port Panel
  (3,835)
  DIYer sets his small garage up with a space-saving attic mounted air compressor and remote switch, air pressure gauge and hose connection.
• Redesigning the 1970 Dodge Coronet Into a Modern Car
  (3,831)
  TheSketchMonkey redesigns a classic American muscle car: the 1970 Dodge Coronet — what would a 2020 Dodge Coronet look like?
• 7 Tips and Tricks To Make Your 110v Welder Perform Like 220v
  (3,831)
  Here are seven solid tips and tricks to help make your 110-volt welder perform much more like a 220-volt machine.
• Project Pictorial: 1936 Auburn Speedster Gets Modern Chassis
  (3,828)
  Staffan Ellström low-budget chassis swaps a 1936 Auburn Speedster found in a shed with a Mercury chassis and Chevy Caprice drivetrain...
• 1966 Buick Riviera GS Chop Top Build
  (3,800)
  You can’t get long and low without chopping the top and adding air ride, so that’s exactly what was done to this 1966 Buick Riviera GS.
• 1938 International Harvester is a Blown 392 Hemi Powered Dually
  (3,796)
  Robert’s 1938 International Harvester sports a blown 392 Hemi that breathes through an 871 blower and exhales through sizable stacks.
• Hand Forming Model T Door Patch Panels
  (3,793)
  With a little practice and careful hammering, even the most rotten doors can be saved on the cheap with patch panels in a few hours.
• Daily Driver Engine Duel ~ Chevy 350 vs. Dodge 360
  (3,787)
  Check out the dyno results of these two back-to-basic builds, using ported stock heads, a mild cam, and a four-barrel intake set up.
• How to Replace a Door Skin
  (3,786)
  How to replace a door skin on a 1967 Chevrolet Camaro including how to remove an old door skin and install a brand new door skin.
• Tour The Gilmore Car Museum ~ North America's Largest Auto Museum
  (3,785)
  The Gilmore Car Museum is located in Hickory Corners, MI, and is home to over 400 cars and motorcycles on a sprawling 90-acre campus.
• Dodge 360 ~ The Other Small Block
  (3,777)
  Richard Holdener puts a Dodge 360 (LA) small-block V8 engine through the paces with full results from bolt-ons, heads, cams, intakes and more.
• Take Your Project To The Next Level With Custom Laser Cut Parts, FAST
  (3,776)
  SendCutSend will precision laser-cut even one-off parts in a variety of materials for as little as $29 and ship free in a couple of days.
• Which 3/8" Cordless Ratchet Driver is the Best?
  (3,773)
  Project Farm tests battery-powered 3/8" drive ratchet drivers to find the best: Milwaukee M12 vs Makita, Earthquake, ProStormer.
• Cheap Tricks To Increase Horsepower
  (3,769)
  All about cheap horsepower tricks — new and old budget-minded parts and procedures designed to make more horsepower.
• Gene Winfield's Custom Shop Tour ~ California Hot Rod Adventure
  (3,768)
  Gene Winfield, one of the original hot rodders and customizers, gives the Iron Trap Garage crew a grand tour of his house/museum.
• How To Fit, Prep, Stain, and Seal (Clear Coat) Classic Truck Bed Wood
  (3,761)
  Seasoned Classic Truck builder Dave Welch shares his experience in Bed Wood preparation, staining, and sealing (clear coat).
• Mark "TheLowLifeCo" Salinas and his Custom Chevy Apache
  (3,750)
  Mark Salinas' story of his custom Chevy Apache that started with a '55 plus scavenged parts and how he built his dream Patina Chevy Apache.
• Roll Coal ~ WelderUp's Insane Custom Turbo Diesel Peterbilt
  (3,747)
  It should be of no surprise that Steve Darnell of WelderUp is behind this insanely cool custom semi-truck, or that he lovingly named it "SWAMP ASS".
• Experience a Pikes Peak Record Run Plus 360° Interactive Ride-Along
  (3,733)
  Grab some popcorn and enjoy 11 minutes at an average speed over 100mph, plus a roof-mount 360° Interactive Ride-Along View.
• 4 Easy Tips to Save Weld Shielding Gas
  (3,725)
  Weld.com goes over four easy tips to save weld shielding gas including correct equipment, settings and a regulator.
• How To Fix Streaking Windshield Wiper Blades Like New in 30 Seconds
  (3,715)
  Renewing your windshield wipers is an easy DIY job and not only restores old wiper blades, but also helps new wiper blades last much longer.
• The Most Iconic Scooters of the 1940s, 50s, and 60s
  (3,714)
  Classic Vintage Scooters from the 1940s, 50s, and 60s including models from Vespa, Lambretta, Lohner, Durkopp, Innocenti, Heinkel, Zündapp, Glas Goggo-Roller, Honda, and Siambretta...
• Torque Converters 101 ~ What Is Stall Speed?
  (3,706)
  Pete Nichols explains stall speed and what that means exactly to help dispel many myths and confusion surrounding stall speed and torque converter function.
• Mustang vs Camaro ~ Who Won Each Decade from the 60s to Today
  (3,700)
  The Ford Mustang and Chevrolet Camaro are two of the most iconic American Muscle cars of all time, but which one is better?
• Is Synthetic Motor Oil Bad For Old Cars?
  (3,698)
  Engineering Explained shows how specially formulated motor oil can help new and old engines add more miles to the odometer.
• The SEMA Show is Back for 2021
  (3,697)
  The SEMA Show is the world's leading automotive trade event bringing together manufacturers and buyers in every segment of the industry.
• Bucket List Road Trips and Events
  (3,690)
  Summit Racing welcomes special guest Brad Phillips from Hagerty and discuss bucket-list road trips and automotive events for the car enthusiast!
• Pontiac Power Heaven ~ A Look Inside Butler Performance Group
  (3,689)
  Butler Performance is a family-owned and operated business, home grown, from the love of classic cars and racing since the 1960s.
• "The Foosenberg" ~ Chip Foose Redesigns a Period-Correct Duesenberg
  (3,686)
  Watch Chip Foose put his own spin on a period-correct Duesenberg, appropriately dubbed "The Foosenberg"...
• 5 Cheap Muscle Cars To Buy In This Insane Project Car Market
  (3,671)
  Tony Angelo from YouTube Channel Stay Tuned tells you something you likely already know — The classic/muscle car/Hot Rod market has gone insane! It's nearly impossible to find a good cheap project car right now! But if you've got somewhere in the...
• Full Classic Car Floor Pan Replacement ~ Fast, Cheap, and Easy
  (3,670)
  This video proves that ANYONE can do a full floor replacement in their home garage with minimal tools, and much faster than patching.
• How To Paint Whitewall Tires
  (3,660)
  Halfass Kustoms shows how to paint whitewall tires. He says that "So far they seem to hold up pretty good to winter abuse".
• Turnin Rust Finds Extremely Rare 1940 Chevrolet Dubl-Duti Milk Truck
  (3,643)
  While scavenging a huge classic salvage yard with 3000+ vehicles, Lance & Wyatt find an extremely rare 1940 Chevrolet Dubl-Duti Milk Truck.
• Best Rust Converter? POR-15 vs Rust-Oleum, Eastwood, Rust Reformer
  (3,634)
  Project Farm tests popular rust converter products for UV resistance, scratch and chip resistance, adhesive strength, and rust resistance.
• Redesigning the 1968 Cadillac Sedan DeVille into a Modern Car
  (3,631)
  TheSketchMonkey applies his design skills and vision to the 1968 Cadillac Sedan DeVille Hardtop — What if it was made today?
• Engine Masters Tests Budget Mods for Big Power!
  (3,627)
  Let's face it, right now everyone wants to find as much power as they can on their engine, for as little money as possible.
• Is the Volkswagen Beetle Germany’s '32 Ford?
  (3,622)
  Chip Foose alters large chunks of the Volkswagen Beetle's iconic body and makes an impressive roadster out of it.
• 570hp LS3 Swapped '64 Chevy Suburban Hot Rod
  (3,617)
  Humberto's 1964 Chevy Suburban "Carryall" was built at home, in his own garage and with some help from friends.
• Beginner English Wheel Basics ~ Build, Buy or Modify and How To Use
  (3,616)
  Karl Fisher overviews English wheels and shows you how to use an English wheel to Planish, Stretch, and Form sheet metal.
• The Ford Model A Museum at The Gilmore ~ Home To Model A Serial No. 1
  (3,609)
  The Ford Model A Museum at The Gilmore is the world's largest museum dedicated to the Ford Model A, thanks to the Model A Ford Foundation.
• SEMA Ignited 2020 ~ The SEMA Show After-Party
  (3,607)
  You're invited to SEMA Ignited 2020, the official SEMA Show after-party where you can connect with industry leaders, celebrities, and award-winning custom vehicles.
• How To Replace A Valve Stem Without Breaking The Tire Bead
  (3,606)
  This inexpensive Valve Stem Tool Kit allows you to replace a valve stem quickly and easily without removing the tire from the wheel.
• The Automotive Inspired Art of Derek McDonald Artworks
  (3,603)
  Derek is passionate about using recycled material, so he frequents scrap yards for pieces of metal and other nonsense to use.
• The Henry Ford Museum has an Insane Collection of Motorsport History
  (3,589)
  Whether you’re a full-blown carcaine addict or just kind of into cars, the Henry Ford Museum is something you absolutely must experience.
• Real Rat Rods ~ Rats Trained to Drive to Collect Fruit Loops!
  (3,588)
  Rats have mastered the art of driving a tiny car to collect food, and seem to find driving relaxing, tests of their poop show.
• 1955-59 GM Truck Body Panel Alignment: Cab to Door to Fender to Hood
  (3,587)
  How to align cab to doors to fenders and hood are fully covered, as well as an explanation of what and where the alignment pivot points are.
• Grinder Cut-Off Wheels Wear Out Too Fast? Check Your Cutting Technique
  (3,582)
  Plunge and Gouge metal cutting methods are tested with high-speed camera footage to figure out why cut off discs deteriorate so quickly.
• Old School Model T Chassis Build
  (3,579)
  In two short days a rolling chassis was crafted and this field-find Model T is supporting its own weight for the first time in decades.
• Cause of Jessi Combs' Fatal Crash: Mechanical Failure at 550 MPH
  (3,576)
  Two months after Jessi Combs' fatal crash during her land-speed record attempt, police released a statement on the cause of the incident.
• 7 Places to Buy Metal for Welding Projects
  (3,574)
  When learning to weld or working a metal fabrication project, one of the first questions is "Where do you buy material for welding projects?"
• 1996 Chevy Impala SS Redesign
  (3,569)
  The 1996 Chevrolet Impala SS (Seventh Generation) design history and body redesign by TheSketchMonkey for 2021.
• If You Own Work Boots, You Need This Hack!
  (3,566)
  WelderUp's Steve Darnell performs this high-tech modification on the sole of every pair of Thorogood boots he owns.
• Easy, Affordable Heavy Rust and Grime Removal with a Needle Scaler
  (3,562)
  Matt goes back to the basics and uses one of the most affordable yet powerful air tools in his shop — a $30 pistol grip needle scaler.
• 1,000hp '55 Chevy Build by MetalWorks Classic Auto Restoration
  (3,561)
  This '55 Chevy ProTouring build sports a 1,000hp 427 LS engine with 2.9L Whipple supercharger and an Art Morrison chassis.
• 10 Fabrication Tips in 10 Minutes
  (3,553)
  Justin Voss delivers 10 quick and easy time-saving welding and metal fabrication tips in 10 minutes.
• FiTech Makes EFI Conversion Easy with Kit and Force Fuel System
  (3,547)
  DD Speed Shop shows how easy an EFI conversion can be with a kit from FiTech on their Giveaway '57 Chevy Belair.
• Which Impact Driver Socket Adapter is Best?
  (3,547)
  Project Farm tests 18 Socket Adapter brands for maximum strength until failure and maximum clamp load force to find out which one is best.
• Foose on Design ~ Tweaking the 1970 Plymouth Cuda
  (3,536)
  When Chip Foose looks at the iconic 1970 Plymouth Cuda he sees three things in need of changing. Here is what he changed and why.
• Tearing Down a 461ci Pontiac Engine
  (3,535)
  Jon tears down a recently found .030″ over-bored Pontiac 455 for his Trans Am tribute car, but finds a surprise inside the clapped-out block.
• Three NHRA Drivers Seriously Injured in '57 Chevy S**tbox of Doom Crash
  (3,533)
  Three NHRA drivers were seriously injured in a crash involving a '57 Chevy wagon known as the S**tbox of Doom.
• How To Choose The Right Air Compressor For Your Automotive Workshop
  (3,530)
  There are four major specifications you’ll need to decide on: pump configuration, tank size, output, and electrical requirements.
• Mopar Madness ~ Hot Rodding a Naturally Aspirated Slant Six
  (3,528)
  How fast can Uncle Tony go with a naturally aspirated slant six? Here's a look at the lightweight Mopar 225 being built to find out.
• Loaner Tools and Services From Your Local Auto Parts Store
  (3,521)
  From spring compressors to specialized pullers, your local auto parts store may have the tools you need — and they'll loan them to you free!
• $20 DIY Homemade Striking Anvil with Hardy Hole
  (3,520)
  Make an inexpensive striking anvil with a hardy hole for stake tool use out of scrap mild-steel...
• DIY 50' Retractable Cord Reel for 240 Volt Welder and Plasma Cutter
  (3,516)
  Build a Retractable Welder Cord Reel for 1/10 the cost of buying one with a 50ft air hose reel, 3 wire slip ring, and welder extension cord.
• Which Bolt Extractor is Best?
  (3,515)
  Project farm tests bolt extractor sets from Drill Hog, Bosch, Ryobi, Cleveland and others on damaged exterior screws and grade 5 bolts...
• Which #2 Phillips Impact Driver Bit is Best
  (3,515)
  #2 Phillips impact driver bits are tested for metal hardness, the twisting force for cam out, and the twisting force to break the bit.
• Roadkill Closes Down Woodward Ave For A Day Of Racing!
  (3,512)
  Roadkill closes Woodward Ave ~ here's a brief history of Woodward Ave drag racing and whats become an all-day event called Roadkill Nights.
• General Motors Heritage Center Tour ~ 110+ Years of GM History
  (3,505)
  Each vehicle in the Collection illustrates a milestone or accomplishment in the history of General Motors or automotive history in general.
• Chip Foose Streamlines the 1963 Split-Window Corvette
  (3,501)
  Chip Foose customizes one of his dream cars, one from the year he was born; the 1963 split-window Chevy Corvette.
• Tour Gene Winfield's Workshop, Movie Car Collection, and Memorabilia
  (3,495)
  Micaela Dempsey and Leslie Kendall tour the workshop and amazing car collection of Gene Winfield at Winfield Customs in Mojave, California.
• How To Tune Out Carburetor Hesitation ~ Accelerator Pump Magic
  (3,493)
  Getting your carbureted engine to snap off idle like a fuel-injected one can be a simple matter of fine-tuning the accelerator pump.
• Are Salvage Title Cars a Bargain or Nightmare?
  (3,484)
  Is it really worth purchasing a car with a salvage title and what are the consequences?
• Exploring Detroit's Abandoned Car Factories
  (3,474)
  Exploring two of the most interesting abandoned car factories in Detroit: The Cadillac Stamping Plant and Fisher Body Plant #21.
• The Munster Koach with Eddie Munster
  (3,468)
  The Munster Koach appeared in over twenty episodes throughout the series' two-year run, and was also seen in Munster, Go Home! using different wheels.
• Chip Foose Draws a Car ~ First-Gen Ford Bronco
  (3,465)
  Watch as car designer and builder Chip Foose turns the iconic 1966 Ford Bronco into a sleek and modern street machine.
• Iron Trap Garage's $2,000 Online Auction Gamble
  (3,464)
  Matt from Iron Trap Garage bid on an auction full of E&J headlights, speed equipment, and other parts and scored some wicked deals.
• DIY Engine Performance ~ How To Port Cylinder Heads
  (3,461)
  Davin Reckow walks you through the ins and outs of how to port your cylinder heads at home with some fairly basic tools.
• How To Add Juice Brakes To Early Ford Spindles
  (3,459)
  A common upgrade for early hot rodders was juice brakes on Model A's and 1932-38 Fords. Matt shows how to install Juice brakes on earlier small pattern spindles.
• How To LEGALLY Title Any Classic Car, Truck, Or Motorcycle Using The Vermont Loophole
  (3,459)
  Here is the step-by-step process to obtain official ownership papers in your name, with a minimal outlay of cash and time.
• Don't Talk To Strangers, Unless He Drives a '67 Camaro RS/SS, of Course
  (3,454)
  Meeting a stranger with a passion for hot rods in common and checking out his impressive classic car collection.
• 1947-87 GM Truck Fender, Door, and Hood Alignment Tips and Tricks
  (3,452)
  Dave Welch takes a Deep Dive into the process of getting your fenders, doors, hood, and other parts to line up perfectly.
• DIY 1970-81 Firebird and Camaro Suspension Rebuild
  (3,449)
  Jon at Mad Scientist Garage demonstrates a complete rebuild of this '75 Firebird suspension using simple hand tools in a single weekend.
• Steve Darnell's Vintage WelderUp School Bus
  (3,449)
  One of Steve Darnell's favorite builds at WelderUp is the old school bus. Steve shares everything that went into creating this unique rig.
• Does Graphite Help Motor Oil Performance?
  (3,443)
  Is it possible that motor oil can actually be improved by adding graphite to it? Does graphite improve fuel efficiency and performance?
• 1987 Buick Grand National Redesign for 2021
  (3,442)
  YouTuber and graphic artist TheSketchMonkey applies his skills to redesign the iconic 1987 Buick Grand National for 2021.
• 1960s Street-Legal Ford Factory Race Cars
  (3,439)
  We journey to the 1960s to see the Ford Motor Company's factory-built race cars that were completely street legal.
• Old Dog, New Truck ~ Redoing Your Late-Model Truck Interior
  (3,438)
  From new dash, leather bench seat cover to carpet, Stacey shows you what a difference a weekend, some LMC parts and a little effort can make.
• Jack Chrisman's 1965 Mercury Comet Restored with Nitro Ford Cammer
  (3,437)
  The restored Sachs and Sons Comet stands as one of the most historic cars in drag racing and we go into full detail about its history.
• How To Not Destroy Your Engine with Nitrous
  (3,435)
  Engine Masters shows you how you can put nitrous into a stock engine and get serious power added without killing the engine.
• Golden Sahara ~ The George Barris Built $1 Million Show Car
  (3,432)
  Hidden from public view for over 50 years, the Golden Sahara was one of America's most famous cars back in the early 60s.
• Junkyard Tour of Tellico Mountain Motors in East Tennessee
  (3,424)
  The Hot Rod Hoarder tours 1,000s of cars and trucks hiding in the woods at Tellico Mountain Motorson the side of a mountain in Tennessee...
• HooptieX Racing Invades King of the Hammers
  (3,422)
  With all the chaos in the world right now, 9 minutes of Craigslist cars getting beaten like dirty rugs is exactly what the doctor ordered.
• How To Install a Custom Wood Bed on an F100 Truck
  (3,417)
  Jeremy installs a custom wood bed on Power Nation's Ford F100 truck project, and a Jeep gets LED's before hitting the trail.
• A Hot Rodded Horseless Carriage
  (3,415)
  We don't really know what to call this or really even what to think of it. Either way, it's hard to deny the craftsmanship and man-hours...
• Making a Custom Stake Pocket Fuel Filler for a Fleetside Bed
  (3,415)
  John Fabris shared a few photos that demonstrate making a custom fuel filler for the stake pocket in a Fleetside bed.
• How To Install Pinion Shims on Your Classic Car
  (3,404)
  This how-to shows pinion/axle shim installation on a '69 Ford Fairlane — the basic principles will work on any solid rear axle vehicle.
• 1933 Ford 3 Window Coupe Blown Ardun Build
  (3,392)
  The stars have aligned, and Matt from Iron Trap Garage got a lead on a 1933 Ford 3 Window listed for sale in a local farmer's newspaper.
• Heads Up Vintage Drag Racing at the Allentown, PA Fairgrounds
  (3,388)
  The Vintage Drags at the Allentown Fairgrounds was started by friends Ej Kowalski and Bill Rowe and we are so happy it has returned in 2021.
• A Trans-Am Inspired 1966 Ford Pro-Touring Mustang
  (3,387)
  Erik Gagnon built his pro-touring patina 1966 mustang for the sole purpose of having fun, auto-crossing, and beating the hell out of it.
• How To Repair Rusty Door Bottoms
  (3,364)
  How to repair rusty door bottoms with a no-nonsense, straight-to-the-point style of metalwork.
• Suzanne Williams' Chopped 1934 Ford Tudor Sedan
  (3,363)
  Suzanne Williams grew her craft until she found her true love: a 1934 Ford Tudor sedan she’s spent nearly half a century perfecting.
• Cleetus McFarland Buys An Abandoned Racetrack
  (3,359)
  What you see here is 63 acres of automotive history. What you see here is the future home of all of our operations. This is Freedom Factory.
• How To Make Slapper Files ~ DIY Metal Shaping Tool
  (3,357)
  Slapper files make raising a dent while knocking down high spots a piece of cake — the file marks appear in the low spots.
• Tour The Worlds Largest Chevy Corvair Graveyard ~ Corvair Ranch
  (3,357)
  There are over 600 Corvair Cars, Trucks, and Ultravans located on the property and six tractor-trailers full of heavy drivetrain parts.
• Inexpensive Universal Hot Rod Disc Brake Conversions
  (3,343)
  Dan at DD Speed Shop is putting fresh binders on the '57 Chevy Bel Air with a Right Stuff Products universal disc brake conversion kit.
• Mo-Par City ~ Chrysler, Dodge, and Plymouth Parts
  (3,342)
  Mo-Par City boasts decades of Mopar parts cars — Over 800 1960s and 70s Dodge, Plymouth, and Chrysler donors on 5 1/2 acres in Oregon, IL.
• The Hoonicorn's Last Ride? Ken Block's 1400hp AWD Mustang Final Drive
  (3,336)
  Ken Block and Ford Motor Company’s exclusive partnership has brought in some real hardware over the past decade in rally and rallycross.
• Did You Win The DD Speed Shop 1957 Chevy Bel Air Giveaway Car?
  (3,331)
  Now that DD Speed Shop has made their subscriber goal, the 1957 Belair has finally been given away to one lucky individual!
• Racing the 2020 Roadkill Zip-Tie Drags in a Borrowed Turbo Race Truck
  (3,323)
  This is a BTS tale of two total strangers and one seriously mashed up race truck having a blast at the 2020 Zip-Tie Drags in Tucson, Arizona.
• Tools That Don't Suck ~ Lenox METALMAX Diamond Edge Cut-off Wheels
  (3,321)
  The Lenox METALMAX diamond abrasive is an alternative to abrasive cutoff wheels for increased durability and smooth, clean and even cuts.
• Making a Custom Dash, Gauge Panel, and Console for a 1937 Rat Rod
  (3,318)
  Broke Bastard Garage makes a custom dash, gauge cluster panel, and center console for the 1937 Rat Rod Project.
• Building a Man-Sized Go-Kart from a Junkyard Bound Chassis
  (3,312)
  Reviving a junkyard bound Buick Regal ~ the left for dead chassis gets a slew of guerrilla-style upgrades that triples the horsepower, improves the handling, and roasts some tires!
• Uncle Tony Busts The BS On Back-Pressure
  (3,300)
  It's the original internal combustion old-wives-tale, but there's more to the way your exhaust system functions than meets the eye.
• Chip Foose Hot Rods a USPS Mail Truck ~ Grumman LLV
  (3,291)
  This workhorse of the USPS survived for many years after its intended lifespan, but how do you make it look a little more … timeless?
• 10 Winter Car Tips and Tricks You Need To Know
  (3,288)
  If you live somewhere that gets snow, this video teaches some helpful tips and tricks I have learned to prepare a vehicle car for snow.
• 1953 Chevy 3100 Becomes Custom Restyled Road Tripper
  (3,280)
  Classic Car Studio gave a 1953 Chevy 3100 truck a top-to-bottom custom restyling to build a couple's road trip dream truck.
• Refining the Volvo Amazon ~ Chip Foose Draws a Car
  (3,280)
  Performance is one reason why the Amazon earned a loyal following. The look is clean and anything but offensive, but can it get better?
• Redesigning The 1967 Corvette Stingray Into A Modern Car
  (3,275)
  What if the 1967 Corvette Stingray was made today with modern manufacturing methods and design? Here's TheSketchMonkey's take.
• The "Independence Chevelle" Full Build Recap and Reveal!
  (3,275)
  Vice Grip Garage jammed the entire 1971 Chevy "Independence Chevelle" build into one video with highlights from every project episode.
• Walk the 2021 Southeastern Chevy / GMC Truck Nationals
  (3,275)
  The 2021 Southeastern Chevy / GMC Truck Nationals features some 1,300 Classic, Custom, and Late Model Chevrolet and GMC trucks.
• Roadkill Nights Interviews & Outtakes: Alex Taylor and Fuel Injection Sucks
  (3,244)
  We caught up with Alex Taylor at Roadkill Nights 2019 and got the inside scoop on troubles with her turbo LS '69 Camaro from a pass earlier in the day. We also ran into Justin and Corey from Fuel Injection Sucks.
• Pinstriping Artist Finds Adventure In Her 1966 Jeepster Commando
  (3,241)
  Kate Cook began selling her art at a young age and used the money she earned to purchased her first car, a 1966 Jeepster Commando.
• How An Amateur Built This 1000hp Custom 1970 Trans Am
  (3,240)
  This is one of the wildest Trans Am builds ever. It has a full tube chassis, a Chevy LSX that revs up to 10,000 RPM, and makes over 1,000hp.
• Which Step Drill Unibit is Best?
  (3,239)
  Project Farm tests Step Drill Unibits for cutting speed and durability using mild and medium steel, then tests the Top 7 on AR400 armor plating.
• Auto Wash Bowls of the Roaring 1920s
  (3,232)
  In the 1920s, roads were unpaved and mud would cake up on the cars underside and wheels — but a spin in the Auto Wash Bowl took care of that!
• Building A High-Performance SB V8 From Scratch with Only Catalog Parts
  (3,226)
  The guys use a Summit catalog to source all the parts they need for a budget-friendly, high-performance small-block engine build.
• Checking Out The LA Classic Car Scene
  (3,220)
  From Ben Kahan of Four Speed Films, who's goal is to draw his generation back into old cars (and the culture that surrounds them) from muscle cars to hot rods.
• Overkill ~ The Ultimate Peterbilt Hot Rod
  (3,211)
  A self-confessed ‘gear head’ has transformed his 1984 Peterbilt 359 semi-truck into a monstrous custom hot rod.
• Making Custom Running Boards with Exhaust Tube and Sheet Metal
  (3,205)
  Bad Chad Hiltz fabs a set of running boards with a stretch of exhaust pipe, 18 gauge metal, angle iron, cardboard, angle grinder, and welder.
• Tony Stewart Shows Off His Absurd Car Collection To Jeff Gordon
  (3,202)
  Tony Stewart gives Jeff Gordon a tour of his amazing garage and ridiculous collection of championship-winning cars, legendary rides and more.
• The Ford 302 Engine ~ Everything You Need To Know
  (3,197)
  Landan from Late Model Restoration goes over everything you need to know about the small block Ford 302 engine found in 1979-95 Mustangs.
• Chargers and Roadkill and HEMI's, Oh My...
  (3,195)
  Junkerup takes a road trip to pick up 3 Dodge Chargers and a 426 HEMI. They manage to find time for having a little fun along the way.
• Will Synthetic Motor Oil Cause Engine Seal Leaks?
  (3,195)
  Conventional Shell Rotella T4 15W-40 and full synthetic T6 5W-30 oils are tested in a 45-year-old tractor that's never tasted synthetic oil.
• The Most Useful Carburetor Video Ever Made
  (3,188)
  Can't get your carburetor to idle? It's not voodoo ~ Understanding this basic circuit will fix 90 percent of your problems.
• Max ~ A Custom 1946 Mercury Coupe by Murpho’s Rods and Customs
  (3,182)
  Max is a 1946 Mercury Coupe with extensive custom body and chassis modifications that include a reworked frame, a full air ride, and more.
• Air Baggin' ~ Should You Setup at Ride Height or Half-Travel?
  (3,176)
  Should you set your air bagged suspension up at ride height or at half-travel? Here's why we prefer the half-travel method.
• Budget Rat Rod Mini Bike Build ~ Vintage Briggs Chopper
  (3,159)
  A $20 chopper mini bike frame from the mid-70s is paired with a 1973 yard sale Briggs & Stratton to build a vintage-style rat rod minibike.
• How To Make a Fan Shroud for Electric Fans with Basic Tools
  (3,151)
  Fitzee's Fabrications walks you through making a simple aluminum fan shroud for dual electric fans with basic tools.
• Raw GoPro Gymkhana Highlights of Ken Block & Friends at GRID Poland
  (3,147)
  Check out 3 runs from Gymkhana GRID Poland featuring my Ford Escort Cossie V2, driver Daigo Saito, and armless drifter Bartosz Ostaloski.
• How To Achieve Power Gains Without Taking Your Engine Apart
  (3,145)
  Adjust ignition, timing, carburetor, air cleaner, and engine oil to improve the performance of each without cracking open your engine.
• The Cheapest '57 Chevy Bel Air Convertible — $5K Build Cost Breakdown
  (3,143)
  DD Speed Shop's Dan breaks down the build costs of his 1957 Bel Air 4-door to 2-door convertible conversion build project.
• 1967 Volvo 123GT ~ Mur's 35 Year Amazon Ownership Story
  (3,131)
  This Volvo Amazon 123GT has been in the back of DD Speed Shop videos and sparked interest, so Dan does a Hoonigan-style build break down.
• How To Shave a Gas Tank Filler Door The Easy (or Brilliant) Way
  (3,130)
  Fitzee's Fabrications demonstrates a genius approach to a fairly simple task: shaving, or filling, the fuel tank filler door on a Fox Body Mustang example.
• Start 'em Young ~ Daddy-Daughter Classic Car Junkyard Adventure
  (3,129)
  YouTuber 'Hot Rod Hoarder' visits Charlie's Used Auto Parts with Carlee for the ultimate daddy-daughter date.
• Building a Volkswagen Inspired Mini Bike in 11 Minutes
  (3,122)
  A Volkswagen inspired mini-bike build with Predator 212cc engine and lights, whitewall tires, new handlebars, and a chain tensioner.
• Missing '73 Ford Mustang Mach 1 Found 40 Years Later
  (3,120)
  Recovering a '73 Ford Mustang Fastback after a get-a-way driver from 20-years ago said they were guaranteed to find several cars in the river.
• Rare 1965 Pontiac GTO Gets OEM Restoration
  (3,116)
  Artie's Restorations performs an outstanding OEM restoration on this rare 1965 Pontiac GTO in Iris Mist, a color used only one model year.
• Adding Custom Oil Pan Baffles for Performance
  (3,116)
  This DIY How-To is for modifying an oil pan with baffles at home for better oil control on acceleration and deceleration.
• Pure Patina and Right Hand Drive, This '64 C10 Blows Our Minds
  (3,109)
  With pure patina and a supremely executed right-hand drive conversion, this '64 Chevy C10 simply blows our minds.
• Which Utility Knife Blade Is Best?
  (3,106)
  Utility knife blades are tested for sharpness, blade edge integrity and frictional loss using cardboard, drywall, copper pipe, and staples.
• How To Dial In Ignition Timing For Performance and Power
  (3,100)
  Conventional ignition timing is the opposite of what's needed for high-performance use. Here's how to set your timing for maximum power.
• Down by the River with the LA's Bedlam Car Club
  (3,099)
  Los Angeles has been a hotbed for traditional hot rodders since the late '40s. Here's a day in the life of this super cool hot rod culture.
• How To Remove A Bad Paint Job Without Damaging The Original Paint
  (3,090)
  Matt goes over how to use Pre Painting Prep and Oil Eater to remove some old black paint while preserving the original paint underneath.
• Five Ways to Improve Handling in an F100
  (3,074)
  We discuss five ways to improve the handling on your Ford F100 truck including polyurethane bushings, sway bars, and Crown Vic swap.
• Classic Roadkill ~ 1,100hp Camaro Goes for a Landspeed Record
  (3,068)
  Finnegan builds 1,100hp big block, Freiburger brings a Camaro he's run 261mph at Bonneville... Win right? Probably not, because Roadkill.
• Which Is The Best Torx Bit Brand?
  (3,051)
  Project Farm tests Torx bits from Milwaukee, DeWalt, Makita, Wera, Wiha, Irwin, Bosch, MasterForce, Bauer, Hercules, and Ryobi.
• What To Expect At The 2020 SEMA Show
  (3,047)
  No doubt the 2020 SEMA Show will be different, but SEMA is making plans to preserve the Show’s core value in a safety-first environment.
• Kip Cyprus' Secret SoCal Car Collection
  (3,045)
  The collection features Neon Signs, Porsches, a Lincoln Continental, Cadillacs, Muscle Cars, Restomods, a full wall of Motorcycles, and more.
• How To Rebuild 1973-79 Ford F100 Disc Brakes
  (3,044)
  Rebuilding 1973-79 Ford F100 disc brakes, from sandblasting and painting, rotors and spindles, to making sure parts are within spec.
• Capturing Speed ~ The Photography of John Schultz
  (3,028)
  He doesn’t work for any big companies, he doesn’t have any sponsors, but he can be found at automotive events all over the country.
• Foose on Design ~ What makes the '32 Ford so iconic?
  (3,021)
  Chip Foose sat down with a pen and Hagerty's cameras to share his thoughts about how this 87-year-old design is still relevant today.
• The Engine that Replaced the Flathead ~ Ford Y-Block Build
  (3,010)
  The Y-Block was Ford's first overhead valve V8 engine and the design the company felt was worthy to replace the world-famous Flathead.
• The Race of Gentlemen 2021 ~ Pre-War Cars Drag Racing On The Beach
  (3,007)
  Hotrods race the 1/8th mile in the sand. Walk-though the Tech Parking Lot, rolling out to the beach, and take a drag down the strip.
• Hot Rod Engines 101 ~ Ford Flathead
  (3,005)
  Iron Trap Garage's Matt walks you through the three distinct generations of the Flathead and the differences between them.
• Hot Rodder's Paradise ~ Inside The Petersen Vault
  (3,001)
  Journey into the Petersen Automotive Museum's vault and tour its amazing collection of Hot Rods and Customs.
• Making A Custom Aluminum Modern Bomber Seat From Scratch
  (2,998)
  The Fab Forums is making some aluminum seats from scratch that have a hot rod bomber seat feel, but with some modern touches.
• Restoration Hack ~ How To Restore Old Chrome
  (2,998)
  This little Restoration Hack is a lifesaver for restoring old chrome or polished metal on those barn finds.
• Soft vs Stiff Springs ~ What's The Best Suspension?
  (2,998)
  The purpose of a suspension system is to keep your tires on the ground, so is it better to have soft coil springs or stiff springs?
• The Wilson Collection ~ 85 Of The World's Rarest Cars
  (2,991)
  Larry Wilson has amassed over 85 of the world's rarest cars including the 11th 275 NART Spider, a multitude of rare Porsche 911s, an original Jaguar D-Type and C-Type as well as an Austin Healey 100S..
• Budget Body Swap ~ 1962 Chevy C30 on a '95 Dodge 4x4 Dually Chassis
  (2,989)
  Meet "Moose The Manbuhlance" ~ A 1962 Chevrolet C30 chassis swapped with a 1995 Dodge 3500 Cummins 4x4. Here's how the build was done.
• Does Back-Dragging Dull a File? Machinist Metal Hand File Usage Test
  (2,989)
  Coarse, medium, and fine machinist files are tested to see if back-dragging dulls a file like many claim. The results may surprise you.